< Back ×
My Vehicle Change Vehicle
2008 Buick Enclave
< Back to View All
A/C & Heating
- Department
- Brands
- Prices
OEM (Genuine) 2008 Buick Enclave Evaporator Asm-Auxiliary A/C
PartNumber: 84358044
Product Specifications- Other Names: Evaporator, Evaporator Core
- Item Dimensions: 4.2 x 16.8 x 12.7 inches
- Item Weight: 2.20 Pounds
- Fitment Type: Direct Replacement
- Replaced by: 84802280
- Part Description: 2008 Buick Enclave Evaporator Asm-Auxiliary A/C
Vehicle Fitment- 2008 Buick Enclave | Avenir, Base, Convenience, CX, CXL, Essence, Leather, Preferred, Premium | 6 Cyl 3.6 L GAS
$207.27 MSRP:$435.46You Save: $228.19 (53%)
Four Seasons® A C Evaporator Core for 2008 Buick Enclave
PartNumber: 54963Product Specifications- Core Depth Fraction: 2-5/16
- Core Depth MM: 58.737
- Core Height Fraction: 5-1/2
- Core Height MM: 139.700
- Core Width Fraction: 8-7/8
- Core Width MM: 225.425
- Depth: 2.3125
- Height: 5.500
- Inlet Fitting Type: Block Fitting
- Material: Aluminum
- O-Ring A Number/Desc: [24402] / Slimline Washer
- O-Ring A Quantity: 1
- O-Ring B Number/Desc: [24403] / Slimline Washer
- O-Ring B Quantity: 1
- Outlet Fitting Type: Block Fitting
- UPC: 096361549630
- Width: 8.875
- Part Description: 2008 Buick Enclave A C Evaporator Core
Vehicle Fitment- 2008 Buick Enclave | All Trims | All Engines
$69.73
OEM (Genuine) 2008 Buick Enclave Evaporator Core
PartNumber: 22804121
Product Specifications- Notes: Enclave, Traverse
- Other Names: Evaporator Core
- Item Dimensions: 25.2 x 14.1 x 14.6 inches
- Item Weight: 9.90 Pounds
- Fitment Type: Direct Replacement
- Replaces: 20870587, 20826645, 15234415
- Part Description: 2008 Buick Enclave Evaporator Core
Vehicle Fitment- 2008 Buick Enclave | Base, CX, CXL | 6 Cyl 3.6 L GAS
$251.36 MSRP:$474.29You Save: $222.93 (48%)
FAQ for A/C Evaporator Core Repair
Q: What will need to be done before replacing the Evaporator Temperature Sensor?
A:
You will need to remove the front floor console extension panel-right side.
By Bob
GM Specialist
28/10/2022Q: What is the recommended torque for the Evaporator Upper Case screw?
A:
The recommended torque is 6 N.m (53 lb in).
By Bob
GM Specialist
28/10/2022Q: How many screws does the Evaporator Upper Case have?
A:
The Evaporator Upper Case has a total of 17 screws.
By Bob
GM Specialist
28/10/2022Q: What is the recommended torque for the Auxiliary HVAC Module Lower Cover bolt?
A:
The recommended torque is 3 N.m (27 lb in).
By Bob
GM Specialist
28/10/2022Q: How many bolts does the auxiliary HVAC module lower cover have?
A:
The auxiliary HVAC module lower cover has a total of 3 bolts.
By Bob
GM Specialist
28/10/2022Q: What will need to be done before replacing the Auxiliary Air Conditioning Evaporator?
A:
You will need to remove the HVAC module-auxiliary, disconnect any wiring connectors or harnesses from the HVAC module, and then remove the evaporator tube retaining clips.
By Bob
GM Specialist
28/10/2022Q: How do you remove the Evaporator Temperature Sensor?
A:
You need to disconnect the sensor electrical connector, and then apply downward pressure on the sensor to release tabs for removal.
By Bob
GM Specialist
28/10/2022Q: What will need to be done before replacing the Air Conditioning Evaporator Core?
A:
You will need to remove the HVAC module and temperature valve actuator right side and left side.
By Bob
GM Specialist
28/10/2022See more FAQs (3)