Notes: with Steel Cover;with California Emission System;Fuel tank contamination is the leading cause of premature fuel pump failure. To reduce risk of contaminating the replacement pump, Delphi recommends cleaning the fuel tank before installing a new pump. Use of fuel tank cleaning kit FC01 is recommended.
Current Draw: 7
Flow Rating: 50 gph
Fuel Level Sender Assembly Included: Yes
Fuel Type: Gas
Gasket or Seal Included: No
In Tank or External: In Tank
Inlet Type: Strainer
Internal or External Strainer: Internal
Item Grade: Standard Replacement
Maximum Pressure: 94.0 PSI
Outlet Outside Diameter: 0.375''
Outlet Quantity: 1
Outlet Type: Quick Connect
Pump Type: Electric
Regulator Included: Yes
Resistance Ohms Empty: 203.0
Resistance Ohms Full: 11.0
Strainer Included: Yes
System Pressure: 51 psi
Terminal Gender: Male
Terminal Quantity: 4
Terminal Type: Blade
UPC: 689604232149
Vapor Pressure Sensor: No
Voltage: 12.0 VDC
Part Description: 2007 Mazda 3 Fuel Pump Module Assembly
Notes: with Federal Emission System;with Plastic Cover;Fuel tank contamination is the leading cause of premature fuel pump failure. To reduce risk of contaminating the replacement pump, Delphi recommends cleaning the fuel tank before installing a new pump. Use of fuel tank cleaning kit FC01 is recommended.
Current Draw: 7
Flow Rating: 50 gph
Fuel Level Sender Assembly Included: Yes
Fuel Type: Gas
Gasket or Seal Included: No
In Tank or External: In Tank
Inlet Type: Strainer
Internal or External Strainer: Internal
Item Grade: Standard Replacement
Maximum Pressure: 94.0 PSI
Outlet Outside Diameter: 0.313''
Outlet Quantity: 1
Outlet Type: Quick Connect
Pump Type: Electric
Regulator Included: No
Resistance Ohms Empty: 203.0
Resistance Ohms Full: 9.0
Strainer Included: Yes
System Pressure: 51 psi
Terminal Gender: Male
Terminal Quantity: 4
Terminal Type: Blade
UPC: 689604232163
Vapor Pressure Sensor: No
Voltage: 12.0 VDC
Part Description: 2007 Mazda 3 Fuel Pump Module Assembly
Notes: Except California Models;Verify that existing fuel pump module assembly has a plastic top;Includes Fuel Pump, Fuel Pressure Regulator, Sending Unit, Float, Fuel Reservoir and Fuel Strainer
Average Current Draw(A): 6
Average Flow Rating(GPH): 19.81
Connector Gender: Male
Connector Quantity: 1
Connector Shape: Rectangle
Country of Orign: China
Fuel Filter Included: No
Fuel Sending Unit Included: Yes
Fuel Tank Pressure Sensor Included: No
Gasket or Seal Included: Yes
Grade Type: Performance
Housing Material: POM
In Tank or External: In Tank
Inlet Size: 0.433
Inlet Type: Strainer
Installation Warnings: No
Internal Or External Strainer: Internal
Lock Ring Included: No
Maximum Pump Pressure (PSI): 130
Minimum Pump Pressure (PSI): 80
Mounting Hardware Included: No
Negative Ground: Yes
Outlet Quantity: 1
Outlet Size: 5/16
Outlet Type: Quick Connect
Product Height (in): 8.62
Product Length (in): 9.37
Product Width (in): 8.86
Pump Type: Turbine
Regulator Included: No
Resistance Ohms Empty: 204
Resistance Ohms Full: 10
Strainer Included: Yes
Terminal Gender: Male
Terminal Quantity: 6
Terminal Type: PIN
UPC: 00072845145024
Voltage: 12V
Weight (lbs): 2.51
Wire Harness Included: No
Part Description: 2007 Mazda 3 Fuel Pump Module Assembly
Notes: Fuel tank contamination is the leading cause of premature fuel pump failure. To reduce risk of contaminating the replacement pump, Delphi recommends cleaning the fuel tank before installing a new pump. Use of fuel tank cleaning kit FC01 is recommended.