Notes: Hydraulic Roller Lifters;Box of 128;Bulk Pack
Note: O.E. Replacement
Package Alert: Carton of 128
UPC: 724956696369
Part Description: 2007 GMC Sierra 3500 HD Engine Valve Lifter
More Info
Vehicle Fitment
2007 GMC Sierra 3500 HD | All Trims | 8 Cyl 6.0L
FAQ for Valve Lifter Repair
Q: How to install the Valve Lifter?
A:
You should install the valve lifters and guide, the valve lifter guide bolts, the cylinder head, and the gasket.
By Bob
GM Specialist
02/11/2022
Q: How to install the valve lifter oil filter?
A:
You should install a new valve lifter oil filter O-ring seal, the new valve lifter oil filter, the oil pressure sensor washer and sensor, and the intake manifold.
By Bob
GM Specialist
02/11/2022
Q: How to install the valve lifter oil manifold?
A:
You should install the valve lifter oil manifold, the valve lifter oil manifold bolts, and the intake manifold.
By Bob
GM Specialist
02/11/2022
Q: How to remove the valve lifter oil manifold?
A:
You should remove the intake manifold, the valve lifter oil manifold bolts, the valve lifter oil manifold, and the outer gasket from the valve lifter oil manifold.
By Bob
GM Specialist
02/11/2022
Q: What is the recommended torque for the valve lifter guide bolts?
A:
The recommended torque is 12 N.m (106 lb in).
By Bob
GM Specialist
02/11/2022
Q: What is the recommended torque for the oil pressure sensor washer and sensor?
A:
The recommended torque is 35 N.m (26 lb-ft).
By Bob
GM Specialist
02/11/2022
Q: What is the recommended torque for the valve lifter oil manifold bolts?
A:
The recommended torque is 25 N.m (18 LB-FT).
By Bob
GM Specialist
02/11/2022
Q: How to remove the Valve Lifter?
A:
You should remove the cylinder head and gasket, the valve lifter guide bolts, the valve lifter guides, and the valve lifters.
By Bob
GM Specialist
02/11/2022
Q: How to remove the valve lifter oil filter?
A:
You should remove the intake manifold, disconnect the engine harness electrical connector, the oil pressure sensor, and the washer, remove the valve lifter oil filter and then remove the valve lifter oil filter O-ring seal.
By Bob
GM Specialist
02/11/2022
See more FAQs (4)
FAQ for Other Repair Info
Q: How to remove the valve rocker arm and push rod?
A:
You can remove the rocker arm cover, the number one-cylinder spark plug, the rocker arm bolts, the rocker arms, the rocker arm pivot support, and the Pushrods.
Q: What is the removal procedure for the valve stem oil seal and valve spring?
A:
The procedure is to remove the rocker arm, the spark plug, the J 22794, the valve stem keys, the J 38606, the Valve Spring cap, the valve spring, the valve stem oil seal, and the valve.
Q: How to remove the valve rocker arm and push rod?
A:
You can remove the Rocker Arm cover, the number one-cylinder spark plug, the rocker arm bolts, the rocker arms, the rocker arm, and the pushrods.