Notes: 5.9 Ft Box; 6.5 Ft Box; 8 Ft Box; Silverado, Sierra
Other Names: Lock Cylinder
Item Dimensions: 4.3 x 2.7 x 2.6 inches
Item Weight: 0.70 Pounds
Fitment Type: Direct Replacement
Part Description: 2007 GMC Sierra 3500 HD Lock Cylinder
More Info
Vehicle Fitment
2007 GMC Sierra 3500 HD | Denali, SLE, SLT, WT | 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL
$90.22MSRP: $136.13
You Save: $45.91 (34%)
FAQ for Trunk Lock Cylinder Repair
Q: What can be corrected by applying the proper lubrication?
A:
In many cases, applying the proper lubrication can correct binding or sticking door lock cylinders and the difficulty in inserting and removing the keys.
By Bob
GM Specialist
01/11/2022
Q: What should be done to repair lock cylinders frozen in cold weather?
A:
You should apply heat to the cylinder with a heat gun, hold the door shutter open, inject small amounts of a recommended lubricant into the cylinder and then work the key into the cylinder repeatedly.
By Bob
GM Specialist
01/11/2022
FAQ for Other Repair Info
Q: What is the removal procedure for the tire wheel hoist?
A:
The procedure is to remove the guide shaft from the hoist collar, the collar from the hoist, the bolt, the hoist from the bracket, and the Spare Tire Hoist shaft guide from the bumper.
Q: What should be noted for the Endgate Latch?
A:
You should support the pickup box endgate, release the endgate cable from the endgate cable bolt, pull gently outwards on the endgate latch and release the pickup box endgate latch rod and then remove the endgate latch transfer the endgate cable.
Q: How to correct the Truck Bed Cover Latch?
A:
You should replace the front and rear pull strap latches with the new design latches following the steps below, open the tailgate, release the left rear tonneau cover latch by using a screwdriver to slide the broken eyelet on the latch to the right, flip the rear of the tonneau cover up and then remove the left rear plastic rail end cover from the rear tonneau cover rail.