Part Description: 2007 GMC Sierra 3500 HD Premium™ Front Inner Steering Tie Rod End
Vehicle Fitment
2007 GMC Sierra 3500 HD | All Trims | All Engines
$23.50
FAQ for Tie Rod End Repair
Q: What is the recommended torque for the Steering Linkage Outer Tie Rod?
A:
The recommended torque is 60 N.m (44 lb-ft).
By Bob
GM Specialist
01/11/2022
Q: What is the recommended torque for the Steering Linkage Inner Tie Rod?
A:
The recommended torque is 75 N.m (55 lb-ft).
By Bob
GM Specialist
01/11/2022
Q: What is the removal procedure for the steering linkage inner tie rod?
A:
The procedure is to remove the steering gear boot, place a pipe wrench on the steering gear rack, place a wrench on the flats of the steering linkage inner tie rod housing, and then rotate the steering linkage inner tie rod housing counterclockwise.
By Bob
GM Specialist
01/11/2022
Q: What is the recommended torque for the Steering Linkage Outer Tie Rod nuts?
A:
The recommended torque is 60 N.m (44 lb-ft).
By Bob
GM Specialist
01/11/2022
Q: What special tool will I need when servicing the steering linkage inner tie rod?
A:
You will need an inner tie rod wrench.
By Bob
GM Specialist
01/11/2022
Q: What is the installation procedure for the steering linkage inner tie rod?
A:
The procedure is to place a pipe wrench on the steering gear rack and then install the steering gear boot.
By Bob
GM Specialist
01/11/2022
Q: How to service the Steering Linkage Outer Tie Rod?
A:
You should separate the steering linkage outer tie rod from the steering knuckle, inspect the steering linkage inner tie rod for bent or damaged threads, clean the tapered surface of the steering knuckle, lubricate the steering linkage inner tie rod threads with chassis lubricant and then adjust the front toe.
By Bob
GM Specialist
01/11/2022
See more FAQs (2)
FAQ for Other Repair Info
Q: How to install the pitman arm?
A:
You can install the Pitman Arm, a new pitman arm washer, the nut, and the steering gear.
Q: How to install the idler arm?
A:
You should install the Idler Arm bolts and nuts, the idler arm, the new idler arm nut to the idler arm, and the engine shield.
Q: How to install the relay rod?
A:
You can install the relay rod, the pitman arm, the idler arm, the pitman arm nut, the idler arm nut, the steering linkage inner tie rods, the steering linkage shock absorber, and the engine shield.