FAQ for Seat Cushion Pad Repair
Q: How to service the Front Seat Adjuster Inner Finish Cover?
A:
You should disengage the bezel around the seat belt buckle, squeeze the tabs in the rear of the cover together to disengage the outer trim cover from the rear trim cover, and then pull outward to release the retainers from the seat assembly.
By BobGM Specialist
01/11/2022 Q: What is the recommended torque for the Rear Seat Recliner Outer Finish Cover bolts?
A:
The recommended torque is 2 N.m (18 lb-ft).
By BobGM Specialist
01/11/2022 Q: What is the recommended torque for the Front Seat Armrest Hinge Finish Cover screws?
A:
The recommended torque is 2 N.m (18 lb in).
By BobGM Specialist
01/11/2022 Q: What is the recommended torque for the Front Seat Back Frame bolts?
A:
The recommended torque is 50 N.m (37 lb-ft).
By BobGM Specialist
01/11/2022 Q: How to service the Front Seat Back Cushion Cover and Cushion Pad?
A:
You should depress the button on the inboard head restraint guide to raise the head restraint to the full up position and then insert a small diameter tool into the hole on the inboard side of the outboard head restraint guide and pull upward to remove.
By BobGM Specialist
01/11/2022 Q: How to service the Front Seat Cushion Outer Trim Panel?
A:
You should remove the screw from the front of the cover, squeeze the tabs in the rear of the cover together to disengage the outer trim cover from the rear trim cover, pull outward to release the retainers from the seat assembly, and then disconnect the electrical connectors.
By BobGM Specialist
01/11/2022 Q: What is the recommended torque for the Front Seat Cushion Outer Trim Panel?
A:
The recommended torque is 2 N.m (18 lb in).
By BobGM Specialist
01/11/2022 Q: How to service the Rear Seat Cushion Cover and Pad?
A:
You should disconnect the j-channel from the seat cushion frame remove the seat cushion cover and pad as an assembly from the frame and then remove the seat cushion cover from the pad.
By BobGM Specialist
01/11/2022 Q: What should be done before servicing the Seat Cushion Trim Cover and Pad?
A:
You should remove the front seat, the front seat recliner lever, the front seat manual lumbar knob, and the front seat adjuster outer finish cover.
By BobGM Specialist
01/11/2022 Q: How many bolts attach to the front seat center cushion?
A:
There are 2 bolts attaching the front seat center cushion.
By BobGM Specialist
01/11/2022 See more FAQs (36)