Other Names: Power Steering Cooler, Power Steering Oil Cooler
Item Dimensions: 6.9 x 21.5 x 11.0 inches
Item Weight: 1.80 Pounds
Fitment Type: Direct Replacement
Part Description: 2007 GMC Sierra 3500 HD Power Steering Oil Cooler
More Info
Vehicle Fitment
2007 GMC Sierra 3500 HD | SLE, SLT, WT | 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL
$131.07MSRP: $209.03
You Save: $77.96 (38%)
FAQ for Power Steering Cooler Repair
Q: How to remove the power steering fluid cooler?
A:
You can remove the radiator grille, as much power steering fluid as possible from the power steering fluid reservoir, the power steering fluid cooler bolts, and the power steering fluid cooler from the vehicle.
By Bob
GM Specialist
01/11/2022
Q: What is the recommended torque for the power steering fluid cooler bolts?
A:
The recommended torque is 9 N.m (80 LB IN).
By Bob
GM Specialist
01/11/2022
Q: How to install the power steering fluid cooler?
A:
You can install the power steering fluid cooler, the power steering fluid cooler bolts, and the radiator grille.
By Bob
GM Specialist
01/11/2022
FAQ for Other Repair Info
Q: How to install the power steering pump shaft seal?
A:
You can lubricate the new power steering pump shaft seal with power steering fluid, use a deep 1-inch tall socket to install the new power steering pump shaft seal, and then install the power steering pump.
Q: What is the bleeding procedure for the power steering system?
A:
You can fully charge the hydro-boost accumulator, raise the vehicle, turn the steering wheel, verify the power steering fluid level per operating specification, start the engine and then verify the fluid level.