Part Description: 2007 GMC Sierra 3500 HD Fuel Pressure Regulator
More Info
Vehicle Fitment
2007 GMC Sierra 3500 HD | SLE, SLT, WT | 8 Cyl 6.6 L DIESEL
$299.64MSRP: $475.76
You Save: $176.12 (38%)
FAQ for Fuel Pressure Sensor Repair
Q: How to remove the fuel pressure sensor?
A:
You can raise and suitably support the vehicle, disconnect the chassis wiring harness electrical connector, wrap a shop towel around the fuel pressure sensor fitting, remove the fuel pressure sensor and then remove the fuel pressure sensor O-ring seal.
By Bob
GM Specialist
29/10/2022
Q: How to install the fuel pressure sensor?
A:
You can lubricate a new fuel pressure sensor O-ring seal, install the new fuel pressure sensor O-ring seal onto the fuel line fitting, wrap a shop towel around the fuel pressure sensor fitting, install a shop towel around the fuel pressure sensor fitting, connect the chassis wiring harness electrical connector and then inspect for leaks.
By Bob
GM Specialist
29/10/2022
FAQ for Other Repair Info
Q: How to install the Fuel Rail and Injectors?
A:
You can install the O-ring seals to the Fuel Injectors, the fuel injectors and retainers, the fuel rail assembly, the fuel rail bolts, the evaporative emission (EVAP) canister purge solenoid valve, the tubes, and the fuel rail stop bracket and bolt.
Q: How to install the Fuel Rail and Injectors?
A:
You can install the O-ring seals to the fuel injectors, the fuel injectors and retainers, the fuel rail assembly, the fuel rail bolts, the evaporative emission (EVAP) canister purge solenoid valve, the tubes, and the fuel rail stop bracket and bolt.
Q: What should be noted for the gasoline/gasoline vapors?
A:
Gasoline or gasoline vapors are highly flammable. A fire could occur if an ignition source is present. You should never drain or store gasoline or diesel fuel in an open container, due to the possibility of fire or explosion.