Part Description: 2007 GMC Sierra 3500 HD Driveshaft Center Support Bearing
More Info
Vehicle Fitment
2007 GMC Sierra 3500 HD | All Trims | 8 Cyl 6.0L
2007 GMC Sierra 3500 HD | All Trims | 8 Cyl 6.6L
FAQ for Driveshaft Center Support Bearing Repair
Q: How to install the Propeller Shaft Center Support Bearing?
A:
You can install the center bearing onto the propeller shaft and then install the propeller shaft.
By Bob
GM Specialist
01/11/2022
Q: How to remove the Propeller Shaft Center Support Bearing?
A:
You can remove the propeller shaft, remove the center bearing, stand the propeller shaft on end in the press with the center bearing supported by the press bars and then press the propeller shaft down and off the center bearing.
By Bob
GM Specialist
01/11/2022
FAQ for Other Repair Info
Q: How to remove the front axle lubricant?
A:
You can remove the engine shield, clean the area around the front axle fill plug and the drain plug, remove the fill plug, remove the drain plug and then drain the fluid from the front Differential carrier assembly.
Q: How to remove the Rear Axle Shaft?
A:
You can remove the tire and wheel assembly, the rear cover and gasket, the pinion shaft locking bolt, the pinion shaft, the shaft part way, the brake drum, the C-lock, and the Axle Shaft from the housing.
Q: How to remove the Seals and Gaskets?
A:
You can remove the tire and wheel assembly, the rear axle housing cover, the axle shaft, the Axle Shaft Seal, and the bearing.