Other Names: CV Joint, Inner CV Joint, Outer CV Joint
Item Dimensions: 8.5 x 6.7 x 7.1 inches
Item Weight: 12.50 Pounds
Replaces: 26069243
Part Description: 2007 GMC Sierra 3500 HD Joint Asm-Front Wheel Drive Shaft Cv
More Info
Vehicle Fitment
2007 GMC Sierra 3500 HD | SLE, SLT, WT | 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL
FAQ for Cv Joint Repair
Q: What is the recommended torque for the small clamp?
A:
The recommended torque is 136 N.m (100 lb-ft).
By Bob
GM Specialist
01/11/2022
Q: What is the recommended torque for the small seal clamp?
A:
The recommended torque is 136 N.m (100 lb-ft).
By Bob
GM Specialist
01/11/2022
Q: How to remove the wheel drive shaft outer joint and boot?
A:
You can remove the wheel drive shaft, the wheel drive shaft seal cover, the first chrome alloy ball, the inner race, and all traces of old grease and any contaminants.
By Bob
GM Specialist
01/11/2022
Q: How to remove the wheel drive shaft inner joint and boot?
A:
You can remove the wheel drive shaft, the wheel drive shaft seal cover, the tripot housing, the small boot retaining clamp, the spacer ring, the tripot spider assembly, and the tripot boot.
By Bob
GM Specialist
01/11/2022
Q: How to install the wheel drive shaft outer joint and boot?
A:
You can install the first chrome alloy ball, the top half of J 36652-1 or J 36652-2 onto the lower half of the tool, the wheel drive shaft seal cover, and the wheel drive shaft.
By Bob
GM Specialist
01/11/2022
Q: How to install the wheel drive shaft inner joint and boot?
A:
You can install the convolute retainer tool over the inboard joint seal, the tripot spider assembly, and the spacer ring.
By Bob
GM Specialist
01/11/2022
See more FAQs (1)
FAQ for Other Repair Info
Q: How to remove the front axle lubricant?
A:
You can remove the engine shield, clean the area around the front axle fill plug and the drain plug, remove the fill plug, remove the drain plug and then drain the fluid from the front Differential carrier assembly.
Q: How to remove the Rear Axle Shaft?
A:
You can remove the tire and wheel assembly, the rear cover and gasket, the pinion shaft locking bolt, the pinion shaft, the shaft part way, the brake drum, the C-lock, and the Axle Shaft from the housing.
Q: How to remove the Seals and Gaskets?
A:
You can remove the tire and wheel assembly, the rear axle housing cover, the axle shaft, the Axle Shaft Seal, and the bearing.