FAQ for Center Console Repair
Q: How many screws attach to the Front Floor Console End Cap?
A:
There are 4 screws attaching the Front Floor Console End Cap.
By BobGM Specialist
01/11/2022 Q: What should be done before servicing the center console end panel?
A:
You should remove the front floor console compartment bezel and then remove the front floor console rear cupholder.
By BobGM Specialist
01/11/2022 Q: What is the recommended torque for the front floor console inner cover panel screws?
A:
The recommended torque is 2 N.m (18 lb in).
By BobGM Specialist
01/11/2022 Q: What should be done before servicing the Front Floor Console?
A:
You should remove the 2 front seats, remove the right and left front floor console trim panels, remove the front floor console bezel and then disconnect the electrical connectors to the console assembly.
By BobGM Specialist
01/11/2022 Q: What should be noted for the roof console assembly?
A:
You should pull down to disengage the retainer clips, disconnect the electrical connectors and then transfer all necessary components.
By BobGM Specialist
01/11/2022 Q: What is the recommended torque for the front floor console armrest assembly screws?
A:
The recommended torque is 2 N.m (18 lb in).
By BobGM Specialist
01/11/2022 Q: How many screws attach to the front floor console compartment?
A:
There are 14 screws attached to the front floor console compartment.
By BobGM Specialist
01/11/2022 Q: What is the recommended torque for the front floor console end cap screws?
A:
The recommended torque is 2 N.m (18 lb in).
By BobGM Specialist
01/11/2022 Q: How many retainers attach to the Roof Console?
A:
There are 2 retainers attaching the Roof Console.
By BobGM Specialist
01/11/2022 Q: What should be noted for the Front Floor Console Bezel Assembly?
A:
You should use a flat-bladed plastic trim tool to release the retainer clips along the rear edge of the bezel, lift the bezel out of the console assembly and then transfer all necessary components.
By BobGM Specialist
01/11/2022 See more FAQs (15)