FAQ for Brake Caliper Repair
Q: What is the recommended torque for the Brake Caliper Guide Pin bolts?
A:
The recommended torque is 108 N.m (80 lb-ft).
By BobGM Specialist
29/10/2022 Q: How to disassemble the Front Brake Caliper Overhaul?
A:
You can remove the brake caliper, the pistons, the boots from the caliper bores, the piston seals, the bleeder valve cap, and the bleeder valve.
By BobGM Specialist
29/10/2022 Q: How to disassemble the Rear Brake Caliper Overhaul?
A:
You can remove the brake caliper, the pistons from the caliper bores, the boots from the caliper bores, the piston seals, the bleeder valve cap, and the bleeder valve.
By BobGM Specialist
29/10/2022 Q: How many bolts attaching the Brake Caliper Guide Pin are there?
A:
There are 2 bolts attaching the Brake Caliper Guide Pin.
By BobGM Specialist
29/10/2022 Q: What needs to be done before servicing the Rear Brake Caliper?
A:
You should raise and support the vehicle and then remove the tire and wheel assembly.
By BobGM Specialist
29/10/2022 Q: How to assemble the Rear Brake Caliper Overhaul?
A:
You can install the square-cut piston seal in the brake caliper bore groove, the boot over the end of the piston, the piston in the bore, the bleeder valve in the brake caliper housing, the bleeder valve cap, and the brake caliper.
By BobGM Specialist
29/10/2022 Q: How many pads attach to the Brake?
A:
There are 2 pads attaching the Brake.
By BobGM Specialist
29/10/2022 Q: How many shims attach to the Brake Pad?
A:
There are 2 shims attached to the Brake Pad.
By BobGM Specialist
29/10/2022 Q: What is the recommended torque for the bleeder valve?
A:
The recommended torque is 12 N.m (106 lb in).
By BobGM Specialist
29/10/2022 Q: What should be done before servicing the Front Brake Caliper Bracket?
A:
You should raise and support the vehicle and then remove the tire and wheel assembly.
By BobGM Specialist
29/10/2022 See more FAQs (10)