Part Description: 2007 GMC Sierra 3500 HD In-Car Temperature Sensor
More Info
Vehicle Fitment
2007 GMC Sierra 3500 HD | Denali, SLE, SLT, WT | 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL
$7.52MSRP: $13.62
You Save: $6.10 (45%)
FAQ for Air Temperature Sensor Repair
Q: What is the recommended torque for the MAF/IAT sensor adapter clamp?
A:
The recommended torque is 4 N.m (35 lb in).
By Bob
GM Specialist
01/11/2022
Q: What should be done before servicing the ambient air temperature sensor?
A:
You should remove the top portion of the grill and gently pull forward and then disconnect the ambient air sensor electrical connector.
By Bob
GM Specialist
01/11/2022
Q: How to install the mass airflow sensor/intake air temperature sensor?
A:
You should install the MAF/IAT sensor to the air cleaner assembly, the MAF/IAT sensor adapter clamp, and the air cleaner outlet resonator.
By Bob
GM Specialist
01/11/2022
Q: What should be noted for the Air Temperature Sensor - (right hand) RH?
A:
You should disconnect the electrical connector and rotate the sensor 1/4 turn to remove it.
By Bob
GM Specialist
01/11/2022
Q: What should be noted for the Air Temperature Sensor - (left hand) LH?
A:
You should disconnect the electrical connector and rotate the sensor 1/4 turn to remove it.
By Bob
GM Specialist
01/11/2022
Q: How to remove the mass airflow sensor/intake air temperature sensor?
A:
You should remove the air cleaner outlet resonator and the mass airflow (MAF)/intake air temperature (IAT) sensor from the air cleaner assembly.
By Bob
GM Specialist
01/11/2022
See more FAQs (1)
FAQ for Other Repair Info
Q: What is the installation procedure for the blower motor?
A:
The procedure is to install the Blower Motor, the blower motor to the heater/ventilation module, the blower motor insulating cover, the blower motor insulating cover screws, and the sound insulator panel.
Q: How to install the heater outlet hose?
A:
You can install the outlet Heater Hose, the outlet heater hose, the outlet heater hose clamp, the heater and surge tank hoses, and the air intake tube.
Q: How many screws attach to the HVAC Control Module?