FAQ for 4Wd Actuator Repair
Q: What is the recommended torque for the actuator?
A:
The recommended torque is 20 N.m (15 lb-ft).
By BobGM Specialist
01/11/2022 Q: How to install the front drive axle actuator?
A:
You should apply a sealant to the threads of the actuator, install the actuator, connect the electrical connector to the actuator and then install the engine shield.
By BobGM Specialist
01/11/2022 Q: How many bolts attach to the Two/Four Wheel Drive Actuator Position Sensor?
A:
There are 2 bolts attaching the Two/Four Wheel Drive Actuator Position Sensor.
By BobGM Specialist
01/11/2022 Q: How many bolts attach to the Two/Four Wheel Drive Actuator?
A:
There are 4 bolts attaching the Two/Four Wheel Drive Actuator.
By BobGM Specialist
01/11/2022 Q: What is the recommended torque for the Two/Four Wheel Drive Actuator Position Sensor bolts?
A:
The recommended torque is 9 N.m (80 lb in).
By BobGM Specialist
01/11/2022 Q: What special tools will I be needing when servicing the Transfer Case Two/Four Wheel Drive Actuator?
A:
You will be needing a Slide Hammer, a Bearing Installer, and a Seal Remover.
By BobGM Specialist
01/11/2022 Q: How to remove the front drive axle actuator?
A:
You should remove the engine shield, disconnect the electrical connector and then remove the actuator.
By BobGM Specialist
01/11/2022 Q: What is the recommended torque for the Two/Four Wheel Drive Actuator bolts?
A:
The recommended torque is 18 N.m (13 lb in).
By BobGM Specialist
01/11/2022 See more FAQs (3)