FAQ for Vehicle Speed Sensors Repair
Q: What is the recommended torque for the vehicle speed sensor?
A:
The recommended torque is 17 N.m (13 lb-ft).
By BobGM Specialist
01/11/2022 Q: What is the preliminary procedure for servicing the vehicle speed sensor?
A:
The procedure is to raise and support the vehicle and remove the transfer case shield.
By BobGM Specialist
01/11/2022 Q: How many bolts does the Input and Output Speed Sensor Assembly attach?
A:
It attaches 2 bolts.
By BobGM Specialist
01/11/2022 Q: How to install the vehicle speed sensor?
A:
You shall install the O-ring seal onto the VSS, coat the O-ring seal with a thin film of transmission fluid, install the VSS, and connect the VSS electrical connector.
By BobGM Specialist
01/11/2022 Q: What is the recommended torque for input and output speed sensor assembly bolts?
A:
The recommended torque is 12 N.m (106 lb in).
By BobGM Specialist
01/11/2022 Q: How to remove the vehicle speed sensor?
A:
The proper way is to disconnect the vehicle speed sensor (VSS) electrical connector and remove the VSS and the O-ring seal.
By BobGM Specialist
01/11/2022 Q: What is the preliminary procedure?
A:
The preliminary procedure is to raise and support the vehicle, remove the transmission fluid pan and filter, and the upper and lower valve body assembly.
By BobGM Specialist
01/11/2022 See more FAQs (2)