FAQ for Seat Heater Pad Repair
Q: How to test the circuit/system?
A:
The proper way is to turn the ignition ON, verify that the driver and passenger door switch heated seat switch parameters display Active while the heated seat switches are pressed and that the MSM driver and passenger seat HVC mode and level parameters are displayed correctly as the heated seat switches are activated through all of the operating modes, and replace the driver or passenger door module if the circuits test normal.
By BobGM Specialist
01/11/2022 Q: How to remove the front seat manual lumbar knob?
A:
The proper way is to push the retainer clip downward and pull outward to release the knob with a flat-bladed tool.
By BobGM Specialist
01/11/2022 Q: What should be verified using the Symptom Tables?
A:
You should verify that there are no DTCs set, and the control modules can communicate via the serial data link.
By BobGM Specialist
01/11/2022 Q: What are the visual/physical inspections for the heating and cooling seats?
A:
You shall inspect for aftermarket devices that could affect the operation of the system and the easily accessible or visible system components for obvious damage or conditions which could cause the symptom.
By BobGM Specialist
01/11/2022 Q: How to service the front seat cushion cover and pad?
A:
You shall disengage the j-channel retainers from the seat cushion frame, and remove the seat cushion cover and pad from the seat cushion frame as an assembly.
By BobGM Specialist
01/11/2022 Q: What is the preliminary procedure for servicing the driver seat and passenger seat back cushion heater?
A:
The procedure is to remove the front seat.
By BobGM Specialist
01/11/2022 Q: How many front seat head restraint guides are needed?
A:
Two front seat head restraint guides are needed.
By BobGM Specialist
01/11/2022 Q: How to service the front seat recliner lever?
A:
The proper way is to push the retainer clip downward and pull outward to release the lever using a fat-bladed tool.
By BobGM Specialist
01/11/2022 See more FAQs (3)