FAQ for Interior Door Handle Repair
Q: How many screws does the assist handle attach?
A:
It attaches 2 screws.
By BobGM Specialist
01/11/2022 Q: What is the preliminary procedure?
A:
The procedure is to remove the door upper trim panel, door window control switch, and door trim panel.
By BobGM Specialist
01/11/2022 Q: How many screws does the roof rail rear assist handle attach?
A:
It attaches 2 screws.
By BobGM Specialist
01/11/2022 Q: How many screws does the windshield pillar assist handle cover attach to?
A:
It attaches 2 screws.
By BobGM Specialist
01/11/2022 Q: How many windshield pillar assist handle covers are needed?
A:
Two windshield pillar assist handle covers are needed.
By BobGM Specialist
01/11/2022 Q: What is the recommended torque for the front side door inside handle bolts?
A:
The recommended torque is 2 N.m(18 lb in).
By BobGM Specialist
01/11/2022 Q: What is the recommended torque for the roof rail rear assist handle screws?
A:
The recommended torque is 6 N.m(53 lb in).
By BobGM Specialist
01/11/2022 Q: How to properly service the front side door inside handle seal?
A:
The proper way is to rotate the front side door inside release handle to the fully open position, use a small pair of 45-degree needle nose pliers to remove the foam seal at the handle to expose the retaining clip, use a small pair of 45-degree needle nose pliers to release the clip inside the handle, and remove the pin after the clip is released.
By BobGM Specialist
01/11/2022 Q: What is the recommended torque for the windshield pillar assist handle cover screws?
A:
The recommended torque is 6 N.m (53 lb in).
By BobGM Specialist
01/11/2022 Q: How many roof rail rear assist handle covers are needed?
A:
Two roof rail rear assist handle covers are needed.
By BobGM Specialist
01/11/2022 See more FAQs (12)