< Back ×
My Vehicle Change Vehicle
2007 GMC Sierra 3500 Classic
< Back to View All
Timing Belts, Chains, Cams & Related Parts
- Department
- Prices
OEM (Genuine) 2007 GMC Sierra 3500 Classic Camshaft
PartNumber: 12561721
Product Specifications- Notes: All Models; 6.0L
- Other Names: Camshaft
- Item Dimensions: 3.4 x 3.4 x 29.2 inches
- Item Weight: 10.20 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2007 GMC Sierra 3500 Classic Camshaft
Vehicle Fitment- 2007 GMC Sierra 3500 Classic | SL, SLE, SLT, WT | 8 Cyl 6.0 L GAS
$466.62 MSRP:$740.85You Save: $274.23 (38%)OEM (Genuine) 2007 GMC Sierra 3500 Classic Camshaft
PartNumber: 98077453
Product Specifications- Notes: All Models
- Item Dimensions: 22.2 x 2.5 x 2.5 inches
- Item Weight: 12.80 Pounds
- Fitment Type: Direct Replacement
- Replaces: 97211770
- Part Description: 2007 GMC Sierra 3500 Classic Camshaft
Vehicle Fitment- 2007 GMC Sierra 3500 Classic | SL, SLE, SLT, WT | 8 Cyl 6.6 L DIESEL
OEM (Genuine) 2007 GMC Sierra 3500 Classic Camshaft
PartNumber: 12556291
Product Specifications- Notes: All Models
- Other Names: Camshaft
- Item Dimensions: 28.7 x 3.4 x 3.5 inches
- Item Weight: 11.30 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2007 GMC Sierra 3500 Classic Camshaft
Vehicle Fitment- 2007 GMC Sierra 3500 Classic | SL, SLE, SLT, WT | 8 Cyl 8.1 L GAS
FAQ for Camshaft Repair
Q: How to remove the camshaft position actuator?
A:
The proper way is to remove the oil pump, the camshaft position (CMP) actuator solenoid valve, and the CMP actuator and timing chain, and insert and secure a tie strap through the center of the actuator and over the reluctor wheel.
By Bob
GM Specialist
29/10/2022Q: What kind of tools will be required in the replacement of the camshaft (LY6, L76, and L92)?
A:
The tools required include EN 46330 Timing Belt Tensioner Retaining Pin, J 42386-A Flywheel Holding Tool, and J 45059 Angle Meter.
By Bob
GM Specialist
29/10/2022Q: What is the removal procedure for the camshaft position actuator magnet?
A:
The procedure is to remove the water pump, disconnect the engine harness electrical connector from the camshaft position (CMP) actuator magnet, and remove the CMP actuator magnet bolts and magnet.
By Bob
GM Specialist
29/10/2022Q: How to remove the camshaft position actuator solenoid valve?
A:
The proper way is to remove the camshaft position (CMP) actuator magnet and the CMP actuator solenoid valve.
By Bob
GM Specialist
29/10/2022Q: What kind of tools will be required in the replacement of the camshaft position actuator?
A:
The tools required include EN 46330 Timing Belt Tensioner Retaining Pin and J 45059 Angle Meter.
By Bob
GM Specialist
29/10/2022Q: What should be noted when removing the camshaft (LY6, L76, and L92)?
A:
You must not turn the crankshaft assembly after the timing chain has been removed to prevent damage to the piston assemblies or the valves.
By Bob
GM Specialist
29/10/2022Q: What is the installation procedure for the camshaft position actuator magnet?
A:
The procedure is to install a new CMP actuator magnet gasket onto the CMP actuator magnet, and the CMP actuator magnet to the front cover, connect the engine harness electrical connector to the CMP actuator magnet and install the water pump.
By Bob
GM Specialist
29/10/2022Q: How to install the camshaft position actuator solenoid valve?
A:
You need to install the new CMP actuator solenoid valve and the CMP actuator magnet.
By Bob
GM Specialist
29/10/2022Q: How to install the camshaft position actuator?
A:
You need to install the CMP actuator and timing chain, a new CMP actuator solenoid valve, and the oil pump.
By Bob
GM Specialist
29/10/2022See more FAQs (4)