Part Description: 2007 GMC Sierra 3500 Classic A/C Accumulator
More Info
Vehicle Fitment
2007 GMC Sierra 3500 Classic | All Trims | 8 Cyl 6.6L
FAQ for A/C Accumulator Repair
Q: What is the recommended torque for the accumulator nut?
A:
The recommended torque is 16 N.m (12 lb in).
By Bob
GM Specialist
01/11/2022
Q: What is the recommended torque for the suction hose nut?
A:
The recommended torque is 16 N.m (12 lb in).
By Bob
GM Specialist
01/11/2022
Q: What is the recommended torque for the accumulator mounting bracket nut?
A:
The recommended torque is 16 N.m (12 lb in).
By Bob
GM Specialist
01/11/2022
Q: What kind of tools will be required in the replacement of the accumulator assembly, spacer plate, and gaskets?
A:
The tools required include J 25025-B Dial Indicator Post and Guide Pin Set and J 36850 Transjel Lubricant.
By Bob
GM Specialist
01/11/2022
FAQ for Other Repair Info
Q: How to remove the blower motor?
A:
The proper way is to remove the sound insulator panel and the Blower Motor insulating cover screws, disconnect the electrical connector from the blower motor and remove the blower motor insulating cover and the blower motor.
Q: What is the preliminary procedure for the heater core?
A:
The procedure is to remove the HVAC module and disconnect the wiring harness retainer from the Heater Core cover.
Q: What is the installation procedure for the heater outlet hose?
A:
The procedure is to install the outlet Heater Hose to the water pump and the surge tank, the outlet heater hose clamp, the heater, and surge tank hoses to the mounting clip, and the air intake tube.