Part Description: 2007 Chevrolet Monte Carlo Vent Control Solenoid
More Info
Vehicle Fitment
2007 Chevrolet Monte Carlo | LS, LT, LTZ, SS | 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L GAS, 8 Cyl 5.3 L GAS
$24.49MSRP: $46.22
You Save: $21.73 (48%)
FAQ for Vapor Canister Purge Solenoid Repair
Q: How do I install the Evaporative Emission Canister Purge Solenoid Valve?
A:
Start with removing the EVAP canister purge and valve. Connect the chassis EVAP pipe to the EVAP purge solenoid connector. Lastly, install the intake manifold cover.
By Omar
GM Specialist
16/03/2022
Q: How do I remove the Evaporative Emission Canister Purge Solenoid Valve?
A:
Start with removing the intake manifold cover. Next disconnect the EVAP Canister purge solenoid electrical connector and the chassis EVAP pipe from the EVAP Canister purge solenoid. To remove the EVAP canister purge valve, you'll need to remove the bolt attaching it.
By Bob
GM Specialist
15/03/2022
FAQ for Other Repair Info
Q: How do I install the EVAP canister vent solenoid valve from the EVAP emission canister hose?
A:
Start with installing the EVAP canister vent solenoid and the bracket. Then connect the solenoid valve to the canister hose, and lastly connect the EVAP canister vent solenoid valve electrical connector.
Q: How do I install the Secondary Air Injection Shutoff and Check Valve?
A:
Start with installing a new gasket onto the air pipe studs. Before installing the air check, be sure that it is properly placed. Next, install the air check valve bolts. Lift the vehicle. Lastly, install the air check valve nuts.