Part Description: 2007 Chevrolet Monte Carlo License Lamp
More Info
Vehicle Fitment
2007 Chevrolet Monte Carlo | LS, LT, LTZ, SS | 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L GAS, 8 Cyl 5.3 L GAS
$45.42MSRP: $68.53
You Save: $23.11 (34%)
FAQ for License Plate Lights Repair
Q: How do I install the license plate lamp bulb?
A:
Start with installing the lamp socket, and then attach the plate lamp socket by turning it clockwise. Then install the plate lamp to the bumper and tighten the license plate lamp screws to 2 Nm (18 LB IN).
By Bob
GM Specialist
16/03/2022
Q: How do I remove the license plate lamp?
A:
Start with removing the screws attaching the license plate lamp, next remove the lamp from the rear bumper fascia, then turn the lamp socket counterclockwise to remove it, and lastly remove the bulb from the socket.
By Bob
GM Specialist
15/03/2022
FAQ for Other Repair Info
Q: How do I install the High Mounted Stop Lamp?
A:
You will need to connect the electrical connector to the high-mounted stop lamp, press the lamp in, and install the bracket.
Q: How do I install the inflator module wiring harness?
A:
Start with attaching it wiring harness to the seat. Next, you will need to attach the side impact inflator module to the seat. Lastly, enable the SIR system.
Q: How do I remove the halogen bulb?
A:
Disconnect the connector from the headlamp bulb socket and turn the bulb counterclockwise to remove it.