< Back ×
My Vehicle Change Vehicle
2007 Chevrolet Monte Carlo
< Back to View All
Air Filters & Intake Systems
- Department
- Prices
OEM (Genuine) 2007 Chevrolet Monte Carlo Intake Plenum
PartNumber: 12626551
Product Specifications- Notes: Impala, Monte Carlo; 3.5l, 3.9l
- Other Names: Intake Manifold, Intake Plenum
- Item Dimensions: 23.2 x 15.0 x 12.1 inches
- Item Weight: 12.30 Pounds
- Fitment Type: Direct Replacement
- Replaces: 12617645
- Part Description: 2007 Chevrolet Monte Carlo Intake Plenum
Vehicle Fitment- 2007 Chevrolet Monte Carlo | LS, LT, LTZ | 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L GAS
$1188.15 MSRP:$1536.08You Save: $347.93 (23%)
OEM (Genuine) 2007 Chevrolet Monte Carlo Manifold Asm, Intake (Service)
PartNumber: 19299913
Product Specifications- Notes: Impala, Monte Carlo; 5.3l
- Other Names: Intake Manifold
- Item Dimensions: 28.1 x 23.1 x 8.7 inches
- Item Weight: 13.70 Pounds
- Fitment Type: Direct Replacement
- Replaces: 89017768
- Part Description: 2007 Chevrolet Monte Carlo Manifold Asm, Intake (Service)
Vehicle Fitment- 2007 Chevrolet Monte Carlo | SS | 8 Cyl 5.3 L GAS
$235.97 MSRP:$374.67You Save: $138.70 (38%)
OEM (Genuine) 2007 Chevrolet Monte Carlo Manifold Asm, Lower Intake
PartNumber: 89017809
Product Specifications- Notes: Impala, Monte Carlo; 3.5l
- Other Names: Intake Manifold, Intake Plenum
- Item Dimensions: 20.4 x 14.5 x 9.4 inches
- Item Weight: 10.90 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2007 Chevrolet Monte Carlo Manifold Asm, Lower Intake
Vehicle Fitment- 2007 Chevrolet Monte Carlo | LS, LT, LTZ | 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L GAS
FAQ for Intake Manifold Repair
Q: How do I install the intake manifold cover?
A:
Start with aligning the cover to the studs on the engine then push down to secure it to the engine. Be sure that all the studs are seated. Install engine oil fill cap.
By Bob
GM Specialist
16/03/2022Q: How do I remove the intake manifold cover?
A:
Start with removing the engine oil fill cap. Then pull the cover up to remove it from the studs.
By Omar
GM Specialist
15/03/2022Q: How should I keep track of the components I remove?
A:
Place the valve train components in a rack to ensure that the components are installed in the same location from which they were removed.
By Bob
GM Specialist
12/03/2022Q: In what sequence should the intake manifold bolts be installed?
A:
Tighten the bolts 1, 2, 3, and 4 in sequence to 16 NM (12 lb. ft.) and the others to 5, 6, 7, and 8 in sequence to 25 NM (18 lb. ft.).
By Omar
GM Specialist
12/03/2022Q: Q: What should be done before servicing the Upper Intake Manifold?
A:
Disconnect the negative battery cable. And drain the cooling system.
By Bob
GM Specialist
12/03/2022Q: What is the recommended bolt torque for the fuel injector harness connector bracket bolt?
A:
The recommended bolt torque is 8 Nm (71 LB IN).
By Omar
GM Specialist
10/03/2022Q: What is the recommended bolt torque for the fuel injector rail bolts?
A:
The recommended bolt torque is 10 Nm (89 LB IN).
By Bob
GM Specialist
10/03/2022Q: What is the recommended bolt torque for the ignition coil bracket bolts?
A:
The recommended bolt torque is 25 NM (18 lb. ft.).
By Bob
GM Specialist
10/03/2022Q: What is the recommended bolt torque for the intake manifold cover ball stud nut?
A:
The recommended bolt torque is 5 NM (44 lb. in.).
By Omar
GM Specialist
10/03/2022Q: What is the recommended bolt torque for the throttle body bolts and nuts?
A:
The recommended bolt torque is 10 NM (89 lb. in.).
By Bob
GM Specialist
09/03/2022See more FAQs (7)