FAQ for Fender Splash Shield Repair
Q: How do I install the splash shield?
A:
Start with installing the splash shield to the lower flange engine compartment side rail. Now route the abs lead through the slot in the splash shield. Align the holes in the splash shield to the ones in the outboard side engine compartment rail. Lastly, install the retainers that attach the engine splash shield to the vehicle.
By OmarGM Specialist
16/03/2022 Q: How do I remove the splash shield?
A:
Start with removing the push-in retainers that attach the ABS lead to the splash shield. Next, remove the engine splash shield from the lower flange of the engine compartment side rail.
By OmarGM Specialist
15/03/2022 Q: How many nuts attach to the rear wheelhouse liner?
A:
2nuts attach the rear wheelhouse liner.
By OmarGM Specialist
13/03/2022 Q: How many retainers attach to the engine splash shield?
A:
3retainers attach the engine splash shield.
By OmarGM Specialist
12/03/2022 Q: How many retainers does the front fender liner have?
A:
The front fender liner has 7 retainers in total.
By BobGM Specialist
12/03/2022 Q: What is the recommended bolt torque for the rear wheelhouse liner nuts?
A:
The recommended bolt torque is 10 Nm (89 LB IN).
By OmarGM Specialist
10/03/2022 Q: What should be done before servicing the wheelhouse liner panel?
A:
You will need to lift and support the vehicle.
By OmarGM Specialist
09/03/2022 Q: What special tools will I be needing when servicing the splash shield?
A:
You will be needing a door trim pad and a garnish clip remover.
By BobGM Specialist
08/03/2022 Q: What will need to be removed before servicing the splash shield?
A:
You will need to remove the left tire/wheel assembly.
By BobGM Specialist
07/03/2022 See more FAQs (4)