Part Description: 2007 Chevrolet Monte Carlo Caliper
More Info
Vehicle Fitment
2007 Chevrolet Monte Carlo | LS, LS Competition, LS Sport, LT, LTZ, SS, SS 35th Anniversary Edition, SS Dale Earnhardt Signature Edition, SS High Sport, SS Pace Car | 6 Cyl 3.4 L GAS, 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 3.9 L GAS, 8 Cyl 5.3 L GAS
Part Description: 2007 Chevrolet Monte Carlo Caliper Asm, Rear Brake
More Info
Vehicle Fitment
2007 Chevrolet Monte Carlo | LS, LS Competition, LS Sport, LT, LTZ, SS, SS 35th Anniversary Edition, SS Dale Earnhardt Signature Edition, SS High Sport, SS Pace Car | 6 Cyl 3.4 L GAS, 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 3.9 L GAS, 8 Cyl 5.3 L GAS
Notes: Supplied with Mounting Bracket;Installation Hardware Included;with Metal Piston;Caliper supplied w/optional HD silicone boots & new hardware
Bleeder Size: M10x1.5
Boots: HD Silicone
Bracket: With Mounting Bracket
Caliper Color: Gray
Caliper Configuration: Unloaded
Inlet Port Size: M10x1.5
Material: Iron
Piston Material: Steel
Piston Quantity: 1-Piston
Piston Size: 38mm (1.5")
Part Description: 2007 Chevrolet Monte Carlo Remanufactured Unloaded Caliper w/Bracket
More Info
Vehicle Fitment
2007 Chevrolet Monte Carlo | All Trims | All Engines
FAQ for Brake Caliper Repair
Q: Can the gaskets be reused?
A:
No, it is recommended the gaskets be replaced when the part is serviced.
By Omar
GM Specialist
16/03/2022
Q: How do I install the brake caliper bracket?
A:
After cleaning the threads and the holes in the knuckle, apply the thread locker to the threads of the caliper bracket bolts. Install the brackets and attach them with the two bolts, install the front brake pads, and then the caliper.
By Bob
GM Specialist
16/03/2022
Q: How do I install the brake caliper?
A:
Bleed the hydraulic brake system, then with the engine off apply the brake pedal and slowly release the pedal, wait 20 seconds then try again until the pedal becomes firm. This will help seat the brake caliper.
By Omar
GM Specialist
16/03/2022
Q: How do I install the rear brake caliper bracket?
A:
After cleaning the threads and the holes in the knuckle, apply the thread locker to the threads of the caliper bracket bolts. Install the brackets and attach them with the two bolts, and install the front brake pads, and the caliper.
By Omar
GM Specialist
16/03/2022
Q: How do I remove the brake caliper bracket?
A:
Start with removing the caliper from the mounting bracket, then remove the front brake pads and the caliper bracket.
By Omar
GM Specialist
15/03/2022
Q: How do I remove the rear brake caliper bracket?
A:
Start with removing the caliper from the mounting bracket, then remove the front brake pads and the caliper bracket.
By Bob
GM Specialist
15/03/2022
Q: How many bolts are attaching the caliper bracket?
A:
2 Bolts are attaching the part.
By Bob
GM Specialist
14/03/2022
Q: How many bolts are attached to the rear caliper bracket?
A:
2 Bolts are attaching the part.
By Omar
GM Specialist
14/03/2022
Q: How many gaskets are in the brake hose fitting?
A:
2gaskets are in the pipe fitting.
By Omar
GM Specialist
13/03/2022
Q: What is the recommended bolt torque for the bolt boots?
A:
The recommended bolt torque is 44 Nm (32 LB-FT).
By Bob
GM Specialist
10/03/2022
See more FAQs (20)
FAQ for Other Repair Info
Q: How do I test the brake rotors?
A:
Select a smooth and empty space, and start by accelerating the vehicle to 30 MPH. apply the brakes a couple of times to ensure proper functionality of the rotor and brake assembly. You should test the rotor until 20 stops have been completed.
Q: How do you install the rear disc brake pads?
A:
You can install the 2 retainers, the pads, and the rear tire/wheel, and fill up the brake master cylinder reservoir.