Part Description: 2007 Chevrolet Monte Carlo Module
More Info
Vehicle Fitment
2007 Chevrolet Monte Carlo | LS, LT, LTZ, SS | 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L GAS, 8 Cyl 5.3 L GAS
FAQ for Body Control Module Repair
Q: How many screws does the communication interface module battery have?
A:
The communication interface module battery has a total of 2 screws.
By Omar
GM Specialist
12/03/2022
Q: How many screws does the navigation receiver have?
A:
The navigation receiver has 3 screws in total.
By Bob
GM Specialist
12/03/2022
Q: What should you remove before replacing the body control module?
A:
You should remove the closeout panel and program the BCM.
By Bob
GM Specialist
08/03/2022
FAQ for Other Repair Info
Q: How do I install the High Mounted Stop Lamp?
A:
You will need to connect the electrical connector to the high-mounted stop lamp, press the lamp in, and install the bracket.
Q: How do I install the inflator module wiring harness?
A:
Start with attaching it wiring harness to the seat. Next, you will need to attach the side impact inflator module to the seat. Lastly, enable the SIR system.
Q: How do I install the license plate lamp bulb?
A:
Start with installing the lamp socket, and then attach the plate lamp socket by turning it clockwise. Then install the plate lamp to the bumper and tighten the license plate lamp screws to 2 Nm (18 LB IN).