< Back ×
My Vehicle Change Vehicle
2007 Chevrolet Monte Carlo
< Back to View All
Air Filters & Intake Systems
- Department
- Color
- Brands
- Prices
Dorman® Air Intake Hose for 2007 Chevrolet Monte Carlo
PartNumber: 696-728Product Specifications- Clamps Included: No
- Color: Black
- Configuration: One Piece
- Emissions Sensor Port Equipped: No
- End 1 Shape: Round
- Grade Type: Regular
- Hose End Shape: Round
- Hose Length: 4.44"
- Inlet Diameter: 3.42"
- Inside Diameter: 3.42"
- Length: 4.44"
- Material: Rubber
- Molded Hose: No
- OE Part Number: 10350742
- Outlet Diameter: 3.35"
- Outside Diameter: 3.3"
- Shape: Molded Assembly
- UPC: 019495392989
- Part Description: 2007 Chevrolet Monte Carlo Air Intake Hose
Vehicle Fitment- 2007 Chevrolet Monte Carlo | All Trims | 6 Cyl 3.5L
$53.00
FAQ for Air Intake Hose Repair
Q: How do I install the air cleaner outlet duct?
A:
Start with installing the duct from the MAF/IAT sensor. Next, you'll need to tighten the duct clamp at the sensor. Attach the duct to the throttle body. Then secure the duct by tightening the clamp to 3 Nm (27 LB IN). Connect the PCV tube to the air cleaner outlet duct. Then install the manifold cover.
By Omar
GM Specialist
16/03/2022Q: How do I install the air injection hose?
A:
Place the air hose and connect the fitting to the air pump. Then connect the air pump hose quickly fitting to the air cleaner assembly.
By Bob
GM Specialist
16/03/2022Q: How do I install the Secondary Air Injection Feed Tube?
A:
Start with opening the hood, then place and connect the air feed tube fitting to the air check valve. Connect the air feed tube fitting to the air pump. Then install the feed tube bolt to the pipe bracket. Lastly, install the air cleaner duct.
By Omar
GM Specialist
16/03/2022Q: How do I install the Secondary Air Injection Pipe?
A:
Place the heat shield on the air pipe, and install one middle bolt to the pipe. Next, install the new gaskets to the studs and bolts. Install the air pipe and the retaining air pipe bolts and the air check valve nuts, and lastly, install the catalytic converter.
By Bob
GM Specialist
16/03/2022Q: How do I remove the Air Cleaner Outlet Duct?
A:
Start with removing the intake manifold cover. Then disconnect the PCV tube from the air inlet duct, loosen the outlet duct clamp at the throttle body and remove the outlet duct. Next, you'll need to loosen the air cleaner outlet duct clamp at the mass air flow IAT sensor and remove the air cleaner outlet duct.
By Omar
GM Specialist
15/03/2022Q: How do I remove the Secondary Air Injection Feed Tube?
A:
Start with opening the hood. Next, remove the air cleaner outlet duct. Disconnect the secondary air injection quick connect fitting from the air check valve. Next, remove the bolt attaching the heater inlet and outlet pipe bracket. Disconnect the air feed tube fitting from the pump. Now you will be able to remove the air feed tube from the vehicle.
By Bob
GM Specialist
15/03/2022Q: How do I remove the Secondary Air Injection Pipe?
A:
Start with removing the catalytic converter. Then remove the nuts that attach the secondary air injection shutoff/check. Next remove the air pipe bolts, the air pipe, the heat shield, and the gaskets. Next, remove the heat shield from the air pipe.
By Omar
GM Specialist
15/03/2022Q: How do I remove the secondary air injection pump hose?
A:
Start with opening the hood, next you will need to disconnect the secondary air injection pump hose fitting from the air pump and the hose fitting from the air pump. Now you can remove the air pump hos from the vehicle.
By Bob
GM Specialist
15/03/2022See more FAQs (3)