FAQ for Air Bag Clockspring Repair
Q: What if the double harness strap is installed?
A:
Adouble wire harness strap is installed onto the wire harness assembly and column, you must route the wires up against the steering column.
By OmarGM Specialist
11/03/2022 Q: What is the recommended bolt torque for the upper trim cover screws?
A:
The recommended bolt torque is 1.5 Nm (13 LB IN).
By OmarGM Specialist
09/03/2022 Q: What should be checked before removing SIR Coil?
A:
You will need to check if the wheels on the vehicle are pointing straight ahead and if the ignition switch is in the lock position.
By OmarGM Specialist
09/03/2022 Q: What should be done before centering the SIR coil?
A:
Position the wheels straight ahead and the block tooth of the steering shaft assembly is in the 12 o'clock position and the ignition switch is in the lock position.
By BobGM Specialist
09/03/2022 Q: What should be done before servicing the Inflatable Restraint Steering Wheel Module Coil?
A:
You will need to disable the SIR system.
By BobGM Specialist
09/03/2022 Q: What special tools will I be needing when servicing the Inflatable Restraint Steering Wheel Module Coil?
A:
You will be needing a Steering Column Anti Rotation Pin.
By OmarGM Specialist
08/03/2022 See more FAQs (1)