< Back ×
My Vehicle Change Vehicle
2007 Chevrolet Malibu
< Back to View All
Wipers & Washers
- Department
- Prices
OEM (Genuine) 2007 Chevrolet Malibu Reservoir Hose
PartNumber: 22675868
Product Specifications- Other Names: Reservoir Hose
- Item Dimensions: 12.5 x 10.3 x 0.3 inches
- Item Weight: 0.70 Pounds
- Fitment Type: Direct Replacement
- Replaces: 22711043
- Part Description: 2007 Chevrolet Malibu Reservoir Hose
Vehicle Fitment- 2007 Chevrolet Malibu | Base, Classic LS, Classic LT, Hybrid, LS, LT, LTZ, Maxx, Maxx LS, Maxx LT, Maxx LTZ, Maxx SS, SS | 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L ELECTRIC/GAS, 4 Cyl 2.4 L FLEX, 4 Cyl 2.4 L GAS, 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L GAS, 6 Cyl 3.9 L GAS
$6.08 MSRP:$9.63You Save: $3.55 (37%)
OEM (Genuine) 2007 Chevrolet Malibu Power Regulator
PartNumber: 15142956
Product Specifications- Other Names: Power Regulator, Washer Hose, Window Regulator
- Item Dimensions: 24.9 x 16.6 x 8.2 inches
- Item Weight: 3.20 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2007 Chevrolet Malibu Power Regulator
Vehicle Fitment- 2007 Chevrolet Malibu | Maxx LS, Maxx LT, Maxx LTZ, Maxx SS | 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L GAS
OEM (Genuine) 2007 Chevrolet Malibu Hose Asm-Windshield Washer Nozzle
PartNumber: 25782170
Product Specifications- Other Names: Washer Hose
- Item Dimensions: 51.2 x 1.1 x 1.0 inches
- Item Weight: 0.40 Pounds
- Fitment Type: Direct Replacement
- Replaces: 22673005, 10375525
- Part Description: 2007 Chevrolet Malibu Hose Asm-Windshield Washer Nozzle
Vehicle Fitment- 2007 Chevrolet Malibu | Base, Classic LS, Classic LT, LS, LT, LTZ, Maxx, Maxx LS, Maxx LT, Maxx LTZ, Maxx SS, SS | 4 Cyl 2.2 L GAS, 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L GAS
FAQ for Windshield Washer Hose Repair
Q: How do I install the rear washer hose?
A:
Start with replacing the damaged section. Use a 9.5 mm (3/8 in) vacuum hose. Overlap the rear washer hose, and the plastic tubing, by 10 mm (0.39 in) on each end. Retain each end of the vacuum hose with a 100 mm (4 in) cable tie. Check for leaks.
By Omar
GM Specialist
26/03/2022Q: How do I install the Washer Solvent Container Hose?
A:
Start with connecting the hose to the pump, then install the washer hose to the container. Route the hoses up into the container clips. Connect the washer hose and electrical harness to the washer pump. Install the fender liner. Connect the solvent container washer hose to the windshield washer hose. Fill the washer solvent container. Close the hood and test for proper function.
By Bob
GM Specialist
25/03/2022Q: How do I install the windshield washer hose?
A:
Start with installing the windshield washer hose and grommets to the air inlet grille panel. Next, install the grille panel. Then connect the windshield washer hose to the washer solvent container hose and the clip retaining the windshield washer hose to the battery. Close the hood and test for proper function.
By Bob
GM Specialist
25/03/2022Q: How do I remove the Rear Washer Hose?
A:
Start with locating the damaged section of the rear washer hose. If a leak is found inside of the body wire harness, cut back the wire harness electrical tape to expose the damaged section and cut it out.
By Omar
GM Specialist
24/03/2022Q: How do I remove the Washer Solvent Container Hose?
A:
Start with opening the hood and disconnecting the solvent container washer hose from the windshield washer hose. Next, you'll need to route the hoses downward to allow draining. Drain the washer solvent from the washer solvent container. Then remove the fender liner. Disconnect the washer hose and electrical harness from the washer pump and remove the washer hose from the washer solvent container.
By Bob
GM Specialist
24/03/2022Q: How do I remove the windshield washer hose?
A:
Start with opening the hood, next disconnect the washer solvent container hose from the windshield washer hose and the clip retaining the windshield washer hose to the battery tray. Remove the air inlet grille panel. Disconnect the windshield washer hose grommets from the air inlet grille panel. Lastly, remove the windshield washer hose from the air inlet grille panel.
By Bob
GM Specialist
24/03/2022See more FAQs (1)