Part Description: 2007 Chevrolet Malibu Premium™ Front Inner Steering Tie Rod End
Vehicle Fitment
2007 Chevrolet Malibu | All Trims | All Engines
FAQ for Tie Rod End Repair
Q: How do you remove the rack and pinion boot?
A:
You can remove the outer tie rod, the rack and pinion gear, and the seal retaining clamp.
By Omar
GM Specialist
23/03/2022
Q: What is the installation procedure for the rack and pinion boot?
A:
The procedure is to install the boot, the small seal retaining clamp, the rack, the pinion gear, and the outer tie rod.
By Omar
GM Specialist
21/03/2022
Q: What is the proper way to install the rack and pinion boot?
A:
The proper way is to install a new clamp, the boot, the outer tie rod end, and the wheel.
By Bob
GM Specialist
20/03/2022
Q: What is the removal procedure for the rack and pinion boot?
A:
The procedure is to remove the tire/wheel, and outer tie rod end, and disengage the steering gear boot.
By Bob
GM Specialist
17/03/2022
FAQ for Other Repair Info
Q: How do I install the power steering reservoir inlet pipe?
A:
Start with placing the clamp on the power steering gear outlet pipe. Then connect both the power steering reservoir inlet and gear outlet pipes. Next, install the Power Steering Hose routing clip and the nut to the generator bracket stud. Place the clamp on the inlet pipe and install it to the reservoir. Install the intake manifold cover. Lastly, you will need to fill and bleed the power steering system.
Q: How do I install the steering knuckle?
A:
Start with installing the Steering Knuckle to the strut assembly. Guide the axle through the steering knuckle. Next, install the lower control arm and the outer tie rod to the steering knuckle. Then Install the wheel bearing, brake rotor, brake caliper, and front wheels. Lower the vehicle.
Q: How do you remove the front brake caliper bracket?
A:
You can remove the Brake Caliper, brake pads, and the brake caliper bracket.