Part Description: 2007 Chevrolet Malibu Switch Asm-Driver Seat & Passenger Seat Adjuster
More Info
Vehicle Fitment
2007 Chevrolet Malibu | Base, Hybrid, LS, LT, LTZ, Maxx, Maxx LS, Maxx LT, Maxx LTZ, Maxx SS, SS | 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L ELECTRIC/GAS, 4 Cyl 2.4 L FLEX, 4 Cyl 2.4 L GAS, 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L GAS, 6 Cyl 3.9 L GAS
FAQ for Seat Heater Switch Repair
Q: How do I install the Heated Seat Control Module?
A:
Start with installing the heated seat control module. Next, connect the electrical connection to the heated seat control module and Install the front seat. Test the seat for proper function.
By Bob
GM Specialist
27/03/2022
Q: How do I install the Heated Seat Switch?
A:
Start with installing the heated seat switch to the trim panel, next connect the wire harness to the switch and route the harness through the V-retainer. Lastly, install the outer trim panel to the seat cushions.
By Omar
GM Specialist
27/03/2022
Q: How do I remove the Heated Seat Control Module?
A:
Start with removing the front seat. Next, disconnect the electrical connection from the heated seat control module. Then remove the heated seat control module by removing the fastener attaching it.
By Bob
GM Specialist
25/03/2022
Q: How do I remove the Heated Seat Switch?
A:
Start with removing the outer trim panel from the seat cushions and disconnect the wire harness from the switch. Lastly, remove the heated seat switch from the trim panel.
By Omar
GM Specialist
25/03/2022
FAQ for Other Repair Info
Q: What is the seat switch installation procedure?
A:
First, install the Power Seat Switch to the outer trim panel on the seat cushion and connect the electrical connector. Next, install the outer trim panel.