2007 Chevrolet Malibu Intake Manifold

Start with installing the new gasket, the intake manifold, and the intake manifold upper bolt and nuts. Next, install the clips to the intake manifold. Place the oil level indicator tube and attach it by installing the bolt. Connect the harness electrical connector to the fuel injector inline electrical connector and the clip to the intake manifold. Install the brake booster hose to the intake manifold. Position the clamp at the intake manifold. Install the EVAP canister purge solenoid valve tube, the fuel rail, and the throttle body.

Start with removing the throttle body, the fuel rail, and the EVAP canister purge solenoid valve tube. Move the brake booster vacuum hose clamp at the intake manifold out of the way. Remove the brake booster hose from the intake manifold and disconnect the electrical connector from the fuel injector inline electrical connector. Remove the fuel injector inline connector clip from the intake manifold. Remove any bolts and nuts attaching to the intake manifold. Then remove the intake manifold.