Notes: Grade: Aftermarket; Description: Seal included; Thread Size: M12 X 1,5; Plug (Connector): 2 Pins
Colour: Black
Height [mm]: 19
Length [mm]: 19
Number of Poles: 2
Packaging Depth [cm]: 3
Packaging height [cm]: 3,3
Packaging width [cm]: 5,8
Spanner Size: 19
Supplementary Article/Supplementary Info: with seal
Thread Size: M12x1,5
Weight [kg]: 0,02962
Width [mm]: 59
Part Description: 2007 Chevrolet Malibu Engine Coolant Temperature Sensor
More Info
Vehicle Fitment
2007 Chevrolet Malibu | All Trims | 4 Cyl 2.2L
2007 Chevrolet Malibu | All Trims | 6 Cyl 3.5L
2007 Chevrolet Malibu | All Trims | 6 Cyl 3.9L
Show More
FAQ for Coolant Temperature Sensors Repair
Q: What is the installation procedure for the engine coolant temperature sensor?
A:
The procedure is to apply the sealant to the sensor, install the ECT sensor, and connect the engine wiring harness electrical connector.
By Omar
GM Specialist
21/03/2022
Q: What is the proper way to remove the engine coolant temperature sensor?
A:
The proper way is to disconnect the engine wiring harness and remove the ECT sensor.
By Omar
GM Specialist
19/03/2022
FAQ for Other Repair Info
Q: How do I install the radiator baffle and deflector?
A:
Start with installing the right-side Radiator air deflector, and then install the right front fender liner and the right-side radiator air deflector, and lower the vehicle.
Q: How do you install the engine coolant thermostat housing?
A:
You can install the Thermostat Housing cover, the thermostat, the water feed pipe, the exhaust heat shield, and install the ECT sensor.
Q: How do you remove the thermostat?
A:
You can drain the cooling system, and remove the radiator outlet hose, Thermostat housing cover, and thermostat.