2007 Chevrolet Malibu Automatic Transmission Shifter Cable

Start with guiding the control cable through the pass-through in the dash panel, Secure the control cable grommet. Install the control cable into the transmission bracket, and the cable to the transmission range switch lever. Now connect the control cable end to the control assembly lever and the control cable to the pin on the control assembly. Secure. Lastly, install the console.

Set the park brake and chock the wheels. Fully lift the retainer from the transaxle range selector cable mechanism. Disconnect the transaxle range selector cable terminal from the transaxle manual shift lever pin. Press the locking tabs inward to release the transaxle range selector cable from the bracket. Remove the console, and disconnect the transaxle range selector cable terminal from the shift lever pin. Remove the transaxle range selector cable from the console. Unplug the shift cable grommet at the cowl panel and remove the shift cable from the vehicle.

Start with removing the console, and remove the cable from the control assembly by pressing the tabs on the control cable. Next, disconnect the control cable from the transaxle range switch lever. Press the 2 tabs on the control cable and remove the cable from the bracket. Then remove the control cable grommet from the dash panel and the control cable from the vehicle.

Start with setting the parking brake and chocking the wheels.