2007 Chevrolet Malibu | Base, Classic LS, Classic LT, Hybrid, LS, LT, LTZ, Maxx, Maxx LS, Maxx LT, Maxx LTZ, Maxx SS, SS | 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L ELECTRIC/GAS, 4 Cyl 2.4 L GAS, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L GAS, 6 Cyl 3.9 L GAS
FAQ for A/C Condenser Repair
Q: What is the proper way to install the condenser?
A:
The proper way is to install the sealing washers, the upper seal, the liquid line, the radiator air deflector, and the headlamp.
By Bob
GM Specialist
21/03/2022
Q: What is the removal procedure for the condenser?
A:
The procedure is to remove the left/right headlamp, the radiator support brackets, the air deflector, the liquid line, and the upper seal.
By Bob
GM Specialist
18/03/2022
FAQ for Other Repair Info
Q: How do I install the Blower Motor Resistor?
A:
Start with installing the Blower Motor Resistor, the blower motor resistor wire harness connector, and the right closeout panel.
Q: How do I install the blower motor?
A:
Start with installing the motor blower seal, the Blower Motor, the blower motor attachment ring if reusing the blower, the blower motor wire harness connector, and the right closeout panel.
Q: How do I remove the Ambient Air Temperature Sensor?
A:
Start with opening the hood and removing the fascia grille. Next, remove the fastener attaching the sensor to the front impact bar. Disconnect the electrical connector from the ambient Air Temperature Sensor and remove the sensor from the vehicle.