< Back ×
My Vehicle Change Vehicle
2007 Chevrolet Impala
< Back to View All
Power Sunroof & Convertible Top
- Department
- Prices
OEM (Genuine) 2007 Chevrolet Impala Motor
PartNumber: 15862418
Product Specifications- Notes: Impala
- Other Names: Motor
- Item Dimensions: 8.1 x 4.1 x 3.1 inches
- Item Weight: 1.20 Pounds
- Fitment Type: Direct Replacement
- Replaces: 22686576
- Part Description: 2007 Chevrolet Impala Motor
Vehicle Fitment- 2007 Chevrolet Impala | 50th Anniversary Edition, LS, LT, LTZ, Police, SS | 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS, 8 Cyl 5.3 L GAS
FAQ for Sunroof Motor Repair
Q: How do you install the sunroof air deflector (Impala)?
A:
You can install the guides to the air deflector, install the screws attaching the sunroof air deflector to the sunroof module, install the actuator to the window track and install the sunroof window.
By Omar
GM Specialist
07/04/2022Q: How do you install the sunroof finishing lace?
A:
You can install the sunroof opening trim lace into place around the sunroof opening and ensure the sunroof trim lace is fully seated to the headliner.
By Bob
GM Specialist
07/04/2022Q: How do you install the sunroof window seal?
A:
You can position the sunroof window seal into the gutter of the sunroof window frame, press the sunroof window seal into place and install the sunroof window.
By Omar
GM Specialist
07/04/2022Q: How do you install the sunroof window?
A:
You can position the sunroof window panel to the sunroof module, install the sunroof window panel screws, adjust the sunroof window panel and inspect the sunroof window panel for proper operation.
By Bob
GM Specialist
07/04/2022Q: How many bolts does the module sunroof have?
A:
The module sunroof has a total of 4 bolts.
By Omar
GM Specialist
06/04/2022Q: What can be used to blow out any drain hose that is plugged?
A:
You can use compressed air, 241 KPI (35 psi) or less to blow out any drain hose that is plugged.
By Omar
GM Specialist
05/04/2022Q: What is important during the replacement procedure for the sunroof switch (Impala)?
A:
It is important to disconnect the electrical connector.
By Omar
GM Specialist
05/04/2022Q: What is the recommended screw torque when installing the motor/actuator?
A:
You can tighten the motor attachment screws to 3.5 N.m (31 lb in).
By Bob
GM Specialist
03/04/2022Q: What is the recommended screw torque when installing the sunroof window?
A:
You can tighten the screws to 4 N.m (35 lb in).
By Omar
GM Specialist
03/04/2022Q: What is the recommended torque when tightening the sunroof glass panel screws?
A:
You can tighten the screws to 4 N.m (35 lb in).
By Omar
GM Specialist
02/04/2022See more FAQs (14)