2007 Chevrolet Impala Shock Absorber

First assemble the following parts: the piston seal, the dust seal, and the piston. Next, install a piece of wood across the piston, install the piston dust seal using the J 8092 and the J 45863, install the bleeder valve in the Brake Caliper housing, and install the bleeder valve cap.

You can install the following: the new boot clamp, the rack and pinion boot, the breather tube, the rack and pinion boot, the boot clamp, the Tie Rod End clamp, and the hexagon jam nut.

You can remove the Brake Master Cylinder, remove the reservoir cap and diaphragm, the master cylinder reservoir, the primary piston assembly, and the secondary piston.