< Back ×
My Vehicle Change Vehicle
2007 Chevrolet Impala
< Back to View All
A/C & Heating
- Department
- Prices
OEM (Genuine) 2007 Chevrolet Impala AC Relay
PartNumber: 13500114
Product Specifications- Notes: Impala, Monte Carlo; A/C;Pcm;Starter
- Item Dimensions: 3.8 x 2.2 x 0.7 inches
- Item Weight: 0.40 Pounds
- Fitment Type: Direct Replacement
- Replaces: 12193606, 19115080, 15328866, 12135034, 15393412, 12088567, 12135170, 19116057
- Part Description: 2007 Chevrolet Impala AC Relay
Vehicle Fitment- 2007 Chevrolet Impala | 50th Anniversary Edition, Base, Eco, LS, LS Sport, LT, LTZ, Police, Premier, SS | 4 Cyl 2.4 L ELECTRIC/GAS, 4 Cyl 2.5 L FLEX, 4 Cyl 2.5 L GAS, 6 Cyl 3.4 L GAS, 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L BI-FUEL, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS, 8 Cyl 5.3 L GAS
$9.55 MSRP:$20.04You Save: $10.49 (53%)
FAQ for Hvac Control Module Repair
Q: How can you view the reasons A/C is currently disabled?
A:
You can view the reasons A/C is currently disabled with a Tech 2(R) by navigating to the HVAC Data display and viewing the °A/C Permission° parameter.
By Omar
GM Specialist
08/04/2022Q: How do you install the automatic transmission control?
A:
You need to install the following: the console shift control, the console shift control retaining nuts, the automatic transaxle range selector cable, the console shift control wiring harness, the console wiring harness, and the console trim plate.
By Omar
GM Specialist
08/04/2022Q: How many screws does the blower motor resistor have?
A:
The blower motor resistor has 2 screws in total.
By Bob
GM Specialist
06/04/2022Q: How many screws does the heater and A/C control assembly have?
A:
The heater and A/C control assembly has a total of 2 screws.
By Omar
GM Specialist
05/04/2022Q: What is the removal procedure for the automatic transmission control?
A:
The procedure is to remove the following: the console trim plate, the console wiring harness, the console shift control wiring harness, the automatic transaxle range selector cable, the console shift control retaining nuts, and the console shift control assembly.
By Omar
GM Specialist
02/04/2022Q: What should you remove before replacing the blower motor control module?
A:
You should remove the right closeout insulator and disconnect the blower motor resistor electrical connector.
By Bob
GM Specialist
29/03/2022Q: What should you remove before replacing the HVAC control assembly?
A:
You should remove the accessory trim plate.
By Bob
GM Specialist
29/03/2022Q: What should you remove before replacing the transmission control module?
A:
You should disconnect the negative battery cable, remove the air cleaner housing and position the engine control module out of the way.
By Omar
GM Specialist
29/03/2022Q: What tool can be used to reprogram the HVAC control module?
A:
You can use SPS.
By Omar
GM Specialist
28/03/2022See more FAQs (4)