Part Description: 2007 Chevrolet Impala Block Asm-Accessory Wiring Junction
More Info
Vehicle Fitment
2007 Chevrolet Impala | LS, LT, LTZ, SS | 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L GAS, 8 Cyl 5.3 L GAS
FAQ for Fuse Box Repair
Q: How do you install the junction block (accessory wiring)?
A:
You can install the fasteners securing the electrical center to the vehicle, install the fasteners securing the electrical center board, connect the positive battery cable and install the electrical center cover.
By Omar
GM Specialist
07/04/2022
Q: What is the removal procedure for the junction block (accessory wiring)?
A:
The procedure is to remove the electrical center cover, disconnect the positive battery cable, remove the fasteners securing the electrical center board, unlock the tabs on the electrical centerboard, and lift and remove the fasteners securing the electrical center bracket to the vehicle.
By Omar
GM Specialist
01/04/2022
Q: What should you remove before replacing the instrument panel electrical center or junction block (right side)?
A:
You should remove the right side carpet retainer.
By Omar
GM Specialist
29/03/2022
FAQ for Other Repair Info
Q: How do you install the starter motor?
A:
You can install the following: the Starter bolts, the engine harness terminal, and positive battery cable terminal, the starter solenoid BAT terminal nut, the torque converter covers, and the front lower air deflector panel.
Q: What should you remove before replacing the body control module?
A:
You should remove the left closeout panel. After replacement, you should program the Body Control Module.
Q: What should you remove before replacing the sunroof motor/actuator?
A:
You should remove the following: the carpet retainer, the sunshade, the pillar garnish molding, the upper center pillar, the rear upper quarter trim, the rear window trim, the headliner, and the Sunroof Motor/actuator.