< Back ×
My Vehicle Change Vehicle
2007 Chevrolet Impala
< Back to View All
Fuel Systems
- Department
- Prices
OEM (Genuine) 2007 Chevrolet Impala Fuel Pump
PartNumber: 19331943
Product Specifications- Notes: Impala, Monte Carlo; 3.5l; W/O Flex Fuel;Impala, Monte Carlo; 3.9l; 3.5 Liter;3.9 Liter;5.3 Liter
- Other Names: Fuel Pump, Sending Unit
- Item Dimensions: 15.5 x 13.7 x 11.3 inches
- Item Weight: 3.00 Pounds
- Fitment Type: Direct Replacement
- Replaces: 19122340, 88965426, 88965402, 19152995, 88965427, 19133580, 19133582, 19122342
- Part Description: 2007 Chevrolet Impala Fuel Pump
Vehicle Fitment- 2007 Chevrolet Impala | 50th Anniversary Edition, LS, LT, LTZ, Police, SS | 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L GAS, 8 Cyl 5.3 L GAS
$378.15 MSRP:$713.50You Save: $335.35 (48%)
OEM (Genuine) 2007 Chevrolet Impala Fuel Pump
PartNumber: 19331980
Product Specifications- Notes: Impala, Monte Carlo; 5.3l
- Other Names: Fuel Pump, Sending Unit
- Item Dimensions: 15.6 x 12.6 x 11.6 inches
- Item Weight: 3.10 Pounds
- Fitment Type: Direct Replacement
- Replaces: 19122344, 88965401, 19152997, 19133584
- Part Description: 2007 Chevrolet Impala Fuel Pump
Vehicle Fitment- 2007 Chevrolet Impala | SS | 8 Cyl 5.3 L GAS
$378.83 MSRP:$714.80You Save: $335.97 (48%)
OEM (Genuine) 2007 Chevrolet Impala Fuel Gauge Sending Unit
PartNumber: 88965400
Product Specifications- Notes: Impala, Monte Carlo; 3.5l; W/O Flex Fuel;Impala, Monte Carlo; 3.9l
- Other Names: Fuel Gauge Sending Unit, Level Sensor
- Item Dimensions: 8.2 x 6.4 x 6.1 inches
- Item Weight: 0.60 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2007 Chevrolet Impala Fuel Gauge Sending Unit
Vehicle Fitment- 2007 Chevrolet Impala | LS, LT, LTZ, Police, SS | 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L GAS, 8 Cyl 5.3 L GAS
OEM (Genuine) 2007 Chevrolet Impala Fuel Tank Meter/Pump SENSOR KIT
PartNumber: 19133586
Product Specifications- Notes: Impala, Monte Carlo; 3.5l; W/Flex Fuel
- Other Names: Fuel Gauge Sending Unit, Level Sensor
- Item Dimensions: 7.1 x 6.2 x 6.2 inches
- Item Weight: 1.20 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2007 Chevrolet Impala Fuel Tank Meter/Pump SENSOR KIT
Vehicle Fitment- 2007 Chevrolet Impala | LS, LT | 6 Cyl 3.5 L FLEX
FAQ for Fuel Level Sensor Repair
Q: How do you install the engine oil level sensor and/or switch?
A:
You can install the engine oil level sensor and bolt, connect the engine oil level sensor electrical connector, lower the vehicle and refill the crankcase with new engine oil.
By Bob
GM Specialist
07/04/2022Q: How do you install the fuel level sensor?
A:
You can slide the fuel level sensor onto the bucket and slide it upward, slide the fuel level sensor upward, connect the fuel level sensor electrical connector and install the fuel sender assembly.
By Omar
GM Specialist
07/04/2022Q: How do you install the fuel sender assembly?
A:
You can position the NEW fuel sender O-ring seal onto the fuel tank, install the fuel sender into the fuel tank, position the lock ring onto the fuel tank, install the fuel sender lock ring, connect the fuel line and the EVAP lines to the sender and install the fuel tank.
By Omar
GM Specialist
07/04/2022Q: What is the removal procedure for the engine oil level sensor and/or switch?
A:
You can remove the oil pan drain plug, drain the crankcase, reinstall the oil pan drain plug, disconnect the engine oil level sensor electrical connector and remove the engine oil level sensor bolt and sensor.
By Bob
GM Specialist
01/04/2022Q: What is the removal procedure for the fuel level sensor?
A:
You can remove the fuel sender assembly, disconnect the fuel level sensor electrical connector, push in the fuel level sensor retainer and slide the fuel level sensor downward and off of the bucket.
By Omar
GM Specialist
01/04/2022Q: What is the removal procedure for the fuel sender assembly?
A:
The procedure is to remove the fuel tank, disconnect the evaporative emission lines and the fuel line, reposition the fuel feed and EVAP lines, unlock the fuel sender lock ring, remove the fuel sender and the fuel sender O-ring seal, place the lock ring on a flat surface and check the warpage for replacement.
By Bob
GM Specialist
01/04/2022Q: When must the lock ring be replaced?
A:
The lock ring must be replaced when the warpage is greater than 0.41 mm (0.016 in).
By Bob
GM Specialist
28/03/2022See more FAQs (2)