FAQ for Brake Pad Set Repair
Q: How do you install the brake pedal assembly?
A:
You can install the brake pedal and bushings, install the brake pedal nut and bolt, install the brake pedal washer and pushrod to the brake pedal, install the brake pedal pushrod retaining clip to the brake pedal and install the left insulator panel.
By OmarGM Specialist
08/04/2022 Q: How do you install the rear disc brake pads?
A:
You can install the 2 retainers to the caliper bracket, install the pads to the caliper bracket, install the upper caliper bolt and install the rear tire and the wheel assembly.
By OmarGM Specialist
07/04/2022 Q: What is the proper way to remove the brake pedal assembly?
A:
You can remove the following: the left insulator panel, the brake pedal pushrod retaining clip, the brake pedal pushrod and washer, the brake pedal nut and bolt, and the brake pedal and bushings.
By BobGM Specialist
04/04/2022 Q: What is the purpose of burnishing the brake pads and brake rotors?
A:
The purpose is to ensure that the braking surfaces are properly prepared after service has been performed on the disc brake system.
By OmarGM Specialist
04/04/2022 Q: What is the recommended bolt torque when installing the upper caliper bolt?
A:
The recommended bolt torque is 44 N.m (32 lb-ft).
By BobGM Specialist
04/04/2022 Q: What is the removal procedure for the rear disc brake pads?
A:
The procedure is to remove the following: the rear tire and the wheel assembly, the upper caliper bolt, the brake pads, and the 2 pad clips.
By BobGM Specialist
31/03/2022 Q: What should you do before replacing the front disc brake pads?
A:
You should inspect the fluid level in the brake master cylinder reservoir and remove the tire and wheel.
By BobGM Specialist
30/03/2022 Q: What should you remove if the brake fluid level is higher than midway between the maximum-full point and the minimum allowable level?
A:
You should remove the brake fluid at the midway point.
By OmarGM Specialist
28/03/2022 Q: When should the burnishing procedure for the brake pad and rotor be performed?
A:
The procedure should be performed when replacing the disc brake rotors and brake pads or refinishing the disc brake rotors.
By BobGM Specialist
28/03/2022 See more FAQs (4)