Part Description: 2007 Chevrolet Impala GENERATOR Assembly
More Info
Vehicle Fitment
2007 Chevrolet Impala | LT, LTZ, Police | 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS
FAQ for Alternator Repair
Q: How do you install the generator?
A:
You can install the following: the generator, the generator bolt, the generator bolt and stud, the engine harness terminal, the generator output BAT terminal nut, and the drive belt.
By Bob
GM Specialist
07/04/2022
Q: What is the recommended nut torque when installing the generator output BAT terminal nut?
A:
The recommended nut torque is 30 N.m (22 lb-ft).
By Omar
GM Specialist
04/04/2022
Q: What is the removal procedure for the generator?
A:
You need to remove the following: the drive belt, the generator output BAT terminal nut, the engine harness terminal, the generator bolt and stud, the generator bolt, and the generator.
By Bob
GM Specialist
01/04/2022
FAQ for Other Repair Info
Q: How do you install the starter motor?
A:
You can install the following: the Starter bolts, the engine harness terminal, and positive battery cable terminal, the starter solenoid BAT terminal nut, the torque converter covers, and the front lower air deflector panel.
Q: How do you install the battery current sensor?
A:
You can slide the new battery current sensor up onto the battery cable, attach the battery current sensor to the positive battery cable using tie straps and electrical tape, install the positive and negative battery cables and connect the I/P harness electrical connector to the battery current sensor.
Q: How do you install the battery tray?
A:
You can install the following parts: the battery tray, the battery tray bolts, and the battery.