< Back ×
My Vehicle Change Vehicle
2007 Chevrolet Impala
< Back to View All
Air Bag
- Department
- Prices
OEM (Genuine) 2007 Chevrolet Impala Front Sensor
PartNumber: 15250331
Product Specifications- Location: Driver Side; Passenger Side
- Other Names: Front Impact Sensor, Front Sensor
- Item Dimensions: 3.3 x 2.2 x 0.9 inches
- Item Weight: 0.40 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2007 Chevrolet Impala Front Sensor
Vehicle Fitment- 2007 Chevrolet Impala | 50th Anniversary Edition, LS, LT, LTZ, Police, SS | 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS, 8 Cyl 5.3 L GAS
$232.04 MSRP:$350.07You Save: $118.03 (34%)
OEM (Genuine) 2007 Chevrolet Impala Side Sensor
PartNumber: 10346367
Product Specifications- Location: Passenger Side; Driver Side
- Other Names: Side Impact Sensor, Side Sensor
- Item Dimensions: 3.3 x 2.2 x 0.9 inches
- Item Weight: 0.40 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2007 Chevrolet Impala Side Sensor
Vehicle Fitment- 2007 Chevrolet Impala | 50th Anniversary Edition, LS, LT, LTZ, Police, SS | 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS, 8 Cyl 5.3 L GAS
$173.42 MSRP:$272.74You Save: $99.32 (37%)
FAQ for Air Bag Sensor Repair
Q: How many bolts does the inflatable front-end sensor mounting have?
A:
The inflatable front-end sensor mounting has a total of 2 bolts.
By Omar
GM Specialist
06/04/2022Q: How many bolts/screws does the inflatable restraint side impact sensor assembly have?
A:
The inflatable restraint side impact sensor assembly has 2 bolts/screws in total.
By Omar
GM Specialist
06/04/2022Q: How many screws does the inflatable restraint sensing and diagnostic module have?
A:
The inflatable restraint sensing and diagnostic module has a total of 3 screws.
By Omar
GM Specialist
05/04/2022Q: What does the proper operation of the SIR sensing system require?
A:
Proper operation of the SIR sensing system requires that any repairs to the vehicle structure return the vehicle structure to the original production configuration.
By Bob
GM Specialist
05/04/2022Q: What is the removal procedure for the airbag Inflatable Restraint Sensing and Diagnostic Module?
A:
The procedure is to disable the SIR system, remove the right front seat, pull the carpeting back, replace the floor panel carpet replacement and program the inflatable restraint SDM.
By Omar
GM Specialist
02/04/2022Q: What may be the reasons for disabling the SIR system?
A:
The reasons may be repairs to the SIR system or servicing a component near or attached to a SIR component.
By Omar
GM Specialist
30/03/2022Q: What should be discarded if the components have been dropped from a height of 91 cm (3 feet) or greater?
A:
You should discard the inflatable restraint sensing and diagnostic module, any inflatable restraint air bag module, inflatable restraint steering wheel module coil, inflatable restraint sensor, inflatable restraint seat belt pre-tensioners, and inflatable restraint PPS module or sensor.
By Omar
GM Specialist
30/03/2022Q: What should you remove before replacing the inflatable restraint front-end sensor?
A:
You should disable the supplemental inflatable restraint system and remove the upper air baffle and deflector.
By Bob
GM Specialist
29/03/2022Q: What should you remove before replacing the inflatable restraint side impact sensor (Impala)?
A:
You should disable the SIR system and remove the front door panel.
By Omar
GM Specialist
29/03/2022Q: What should you replace after a collision involving airbag deployment?
A:
You should replace the following: the inflatable restraint I/P module, the inflatable restraint steering wheel module, the inflatable restraint SDM, the inflatable restraint front-end sensors, and the inflatable restraint seat belt retractor pre-tensioners.
By Omar
GM Specialist
28/03/2022See more FAQs (5)