2007 Chevrolet Equinox Vehicle Speed Sensors

You may need to apply GM T-IV automatic transaxle fluid GM P/N 88900925 to the new input speed sensor O-ring, then install the new input speed sensor O-ring onto the input speed sensor, install the input speed sensor to the transaxle, and install the input speed sensor bolt then tighten the bolt to 6 N.m (53 lb in), finally connect the wiring harness to the input speed sensor and install the battery tray.

You may need to apply GM T-IV automatic transaxle fluid GM P/N 88900925 to the new output speed sensor O-ring, then install the new output speed sensor O-ring, the output speed sensor, the output speed sensor bolt, finally connect the wiring harness to the output shaft speed sensor.

You will need to remove the battery tray, disconnect the wiring harness from the input speed sensor, then remove the input speed sensor bolt, the input speed sensor, and the input speed sensor O-ring.

The recommended torque is 6 N.m (53 lb in).

You will need to disconnect the wiring harness from the output shaft speed sensor, then remove the output speed sensor bolt, and finally remove the output shaft speed sensor and the O-ring.