Part Description: 2007 Chevrolet Equinox Timing Chain
More Info
Vehicle Fitment
2007 Chevrolet Equinox | LS, LT, LTZ | 6 Cyl 3.4 L GAS
$64.84MSRP: $107.33
You Save: $42.49 (40%)
FAQ for Timing Chain Repair
Q: What's the recommended torque for the timing chain dampener bolts?
A:
The recommended torque is 21 N.m (15 lb-ft).
By Bob
GM Specialist
01/11/2022
Q: What's the recommended torque for the crankshaft mounting bolt?
A:
The recommended torque is 140 N.m (103 lb-ft).
By Bob
GM Specialist
01/11/2022
Q: How do you remove the Timing Chain and Sprockets?
A:
You can remove the engine front cover, the camshaft sprocket bolt, the camshaft sprocket, and the timing chain, then remove the crankshaft sprocket, the timing chain dampener bolts, and then the timing chain dampener.
By Bob
GM Specialist
01/11/2022
FAQ for Other Repair Info
Q: How to install the Drive Belt Idler Pulley-Left Side?
A:
You may need to install the left belt Idler Pulley and bolt to the generator bracket and ensure the drive belt is properly centered on all the pulleys except the right idler pulley, next rotate the drive belt tensioner away from the drive belt and install the drive belt to the right idler pulley, next release J 39914 and remove J 39914 from the drive belt tensioner, then inspect the drive belt to ensure the belt is properly centered on all the pulleys and install the air cleaner intake duct.
Q: What tools are needed to replace the Drive Belt Tensioner?
A:
You will need a J 39914 Serpentine Belt Tensioner Unloader.
Q: How to remove the Camshaft Rear Bearing Hole Plug?
A:
You will need to remove the engine flywheel, and then the Camshaft rear bearing hole plug.