Part Description: 2007 Chevrolet Equinox Knob Asm-Automatic Transmission Control Lever
More Info
Vehicle Fitment
2007 Chevrolet Equinox | LS, LT, LTZ, Sport | 6 Cyl 3.4 L GAS, 6 Cyl 3.6 L GAS
FAQ for Shift Knob Repair
Q: What should be noticed when removing the shift control knob screw?
A:
You will need to loosen the shift control knob screw for approximately 4-5 turns. It is not necessary to fully remove the screw from the shift control knob.
By Bob
GM Specialist
02/11/2022
Q: What's the recommended torque for the shift control knob screw?
A:
The recommended torque is 1.5 N.m (13 lb in).
By Bob
GM Specialist
02/11/2022
FAQ for Other Repair Info
Q: How to install the Front Floor Console Front Cup Holder?
A:
You may need to install the Cup Holder to the track, position the track in the console assembly, install the console track screws and tighten the screw to 2.5 N.m (22 lb in), then snap the cupholder cover in place and inspect the cupholder for correct operation.
Q: What should be noticed when removing the Center Pillar Upper Trim Panel?
A:
You will need to gently on the garnish molding to disengage the attaching clips, starting at the top.
Q: How many rear seat anchor plate bezels are needed when installing the Rear Seat Back Cushion Trim Panel?