< Back ×
My Vehicle Change Vehicle
2007 Chevrolet Equinox
< Back to View All
Valves, Valve Covers & Valvetrain
- Department
- Brands
- Prices
OEM (Genuine) 2007 Chevrolet Equinox Push Rods
PartNumber: 12584950
Product Specifications- Notes: Equinox, Torrent; Intake
- Other Names: Push Rod
- Item Dimensions: 6.6 x 0.8 x 0.4 inches
- Item Weight: 0.40 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2007 Chevrolet Equinox Push Rods
Vehicle Fitment- 2007 Chevrolet Equinox | LS, LT, LTZ | 6 Cyl 3.4 L GAS
$4.14 MSRP:$6.55You Save: $2.41 (37%)OEM (Genuine) 2007 Chevrolet Equinox Push Rods
PartNumber: 12584951Product Specifications- Notes: Equinox, Torrent; Exhaust
- Other Names: Push Rod
- Item Dimensions: 6.8 x 0.8 x 0.4 inches
- Item Weight: 0.40 Pounds
- Fitment Type: Direct Replacement
- Replaces: 12599951
- Part Description: 2007 Chevrolet Equinox Push Rods
Vehicle Fitment- 2007 Chevrolet Equinox | LS, LT, LTZ | 6 Cyl 3.4 L GAS
$4.14 MSRP:$6.55You Save: $2.41 (37%)
Sealed Power® Push Rod for 2007 Chevrolet Equinox
PartNumber: RP-3330Product Specifications- Notes: Loc: Int; 5.7460" O.A.L; Std Size
- Actual Length: 145.9480; 5.7460
- Ball Diameter: 7.9250
- Ball Diameter (Inch): 0.3120
- End Type: B-B Ball & Ball
- Hole Ind: Y
- Overall Length: 146.5580
- Overall Length (Inch): 5.7700
- Size: Standard Size
- Standard Size: Standard
- UPC: 724956849062
- Wall Thickness: 1.5240
- Wall Thickness (Inch): 0.0600
- Part Description: 2007 Chevrolet Equinox Push Rod
Vehicle Fitment- 2007 Chevrolet Equinox | All Trims | 6 Cyl 3.4L
FAQ for Pushrod Repair
Q: What are the lengths of the intake valve push rods and the exhaust valve push rods?
A:
The intake valve push rods measure 146.0 mm (5.75 in) in length. The exhaust valve push rods measure 152.5 mm (6.0 in) in length.
By Bob
GM Specialist
02/11/2022Q: How to remove the Valve Rocker Arm and Push Rod?
A:
You will need to remove the valve rocker arm cover(s), the valve rocker arm cover(s), then the valve rocker arm(s), and the pushrod(s).
By Bob
GM Specialist
02/11/2022Q: How to install the Valve Rocker Arm and Push Rod?
A:
You may need to coat the ends of the push rods using prelube GM P/N 1052367 (Canadian P/N 992869) or the equivalent, install the push rods in their original location, then coat the rocker arm friction surfaces using prelube GM P/N 1052367 (Canadian P/N 992869) or the equivalent, install the valve rocker arms in their original positions and the valve rocker arm bolts, then tighten the bolts to 42 N.m (31 lb-ft) and install the valve rocker arm cover(s).
By Bob
GM Specialist
02/11/2022