< Back ×
My Vehicle Change Vehicle
2007 Chevrolet Equinox
< Back to View All
Trunks & Tailgates
- Department
- Prices
OEM (Genuine) 2007 Chevrolet Equinox Hinge
PartNumber: 25820073
Product Specifications- Location: Driver Side; Passenger Side
- Other Names: Hinge
- Item Dimensions: 7.1 x 4.6 x 4.6 inches
- Item Weight: 0.80 Pounds
- Fitment Type: Direct Replacement
- Replaces: 21998817, 15781608
- Part Description: 2007 Chevrolet Equinox Hinge
Vehicle Fitment- 2007 Chevrolet Equinox | LS, LT, LTZ, Sport | 6 Cyl 3.4 L GAS, 6 Cyl 3.6 L GAS
FAQ for Liftgate Hinge Repair
Q: What should be noticed when replacing the liftgate lock striker?
A:
You will need to mark the location of the striker with a grease pencil for installation purposes, check lift gate closing efforts and align the striker as required.
By Bob
GM Specialist
01/11/2022Q: How many liftgate lock striker screws are needed when installing the liftgate lock striker?
A:
2liftgate lock striker screws attach.
By Bob
GM Specialist
01/11/2022Q: How to remove the Liftgate Hinge?
A:
You will need to open the liftgate and support, remove the liftgate trim panel, mark the location of the liftgate hinges with a grease pencil, then remove the liftgate struts, the hinge to liftgate bolts, and the hinge to body nuts, and finally remove the hinges one at a time.
By Bob
GM Specialist
01/11/2022Q: What's the recommended torque for the liftgate lock striker screws?
A:
The recommended torque is 25 N.m (18 lb-ft).
By Bob
GM Specialist
01/11/2022Q: How to install the Liftgate Hinge?
A:
You may need to align the hinge to body alignment marks made in the removal process and install the nuts and align the hinge to liftgate alignment marks made in the removal process and install the bolts, then install the liftgate struts and lower the liftgate slowly and inspect the alignment, then tighten the hinge to body nuts to 25 N.m (18 lb-ft) and tighten the hinge to liftgate bolts to 25 N.m (18 lb-ft), finally install the liftgate trim panel.
By Bob
GM Specialist
01/11/2022