< Back ×
My Vehicle Change Vehicle
2007 Chevrolet Equinox
< Back to View All
Engine Mounts & Mounting Hardware
- Department
- Brands
- Prices
Anchor® Front Passenger Side Engine Mount for 2007 Chevrolet Equinox
PartNumber: 3110Product Specifications- UPC: 081106031105
- Part Description: 2007 Chevrolet Equinox Front Passenger Side Engine Mount
Vehicle Fitment- 2007 Chevrolet Equinox | All Trims | 6 Cyl 3.4L
$50.71
Westar® Front Passenger Side Engine Mount for 2007 Chevrolet Equinox
PartNumber: EM-3110Product Specifications- UPC: 656591031109
- Part Description: 2007 Chevrolet Equinox Front Passenger Side Engine Mount
Vehicle Fitment- 2007 Chevrolet Equinox | All Trims | 6 Cyl 3.4L
$61.74
OEM (Genuine) 2007 Chevrolet Equinox Mount Bracket
PartNumber: 22692548
Product Specifications- Notes: 3.4 Liter
- Other Names: Mount Bracket
- Item Dimensions: 15.5 x 5.5 x 5.4 inches
- Item Weight: 1.70 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2007 Chevrolet Equinox Mount Bracket
Vehicle Fitment- 2007 Chevrolet Equinox | LS, LT, LTZ | 6 Cyl 3.4 L GAS
$126.87 MSRP:$201.44You Save: $74.57 (38%)
OEM (Genuine) 2007 Chevrolet Equinox Front Mount
PartNumber: 25979189
Product Specifications- Notes: Equinox, Torrent; Front; 3.4 Liter
- Other Names: Front Mount, Mount
- Item Dimensions: 11.0 x 6.6 x 6.6 inches
- Item Weight: 4.50 Pounds
- Fitment Type: Direct Replacement
- Replaces: 22698065, 22698349, 25826943, 15297043
- Part Description: 2007 Chevrolet Equinox Front Mount
Vehicle Fitment- 2007 Chevrolet Equinox | LS, LT, LTZ | 6 Cyl 3.4 L GAS
OEM (Genuine) 2007 Chevrolet Equinox Brace-Transaxle
PartNumber: 12576733
Product Specifications- Notes: 3.4 Liter
- Other Names: Front Brace
- Item Dimensions: 11.9 x 5.1 x 5.0 inches
- Item Weight: 0.80 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2007 Chevrolet Equinox Brace-Transaxle
Vehicle Fitment- 2007 Chevrolet Equinox | LS, LT, LTZ | 6 Cyl 3.4 L GAS
FAQ for Engine Mount Repair
Q: What's the recommended torque for the engine mount to engine mount bracket bolts?
A:
The recommended torque is 50 N.m (81 lb-ft).
By Bob
GM Specialist
01/11/2022Q: What's the recommended torque for the engine mount to frame rail stud nuts?
A:
The recommended torque is 110 N.m (81 lb-ft).
By Bob
GM Specialist
01/11/2022Q: How to install the Engine Front Mount?
A:
You may need to install the transmission mount-to-transmission bolts and the transmission mount bolt, then lower the vehicle.
By Bob
GM Specialist
01/11/2022Q: What's the recommended torque for the transmission mount bolt?
A:
The recommended torque is 110 N.m (81 lb-ft).
By Bob
GM Specialist
01/11/2022Q: What's the recommended torque for the front transmission mount through bolt?
A:
The recommended torque is 110 N.m (81 lb-ft).
By Bob
GM Specialist
01/11/2022Q: What's the recommended torque for the strut bolts that tightened the temporary strut studs?
A:
The recommended torque is 25 N.m (18 lb-ft).
By Bob
GM Specialist
01/11/2022Q: What's the recommended torque for the transmission mount-to-transmission bolts?
A:
The recommended torque is 50 N.m (37 lb-ft).
By Bob
GM Specialist
01/11/2022Q: What's the recommended torque for the front motor mount through bolt?
A:
The recommended torque is 110 N.m (81 lb-ft).
By Bob
GM Specialist
01/11/2022Q: How to remove the Engine Mount-Right Side?
A:
You will need to remove the air cleaner assembly and support the engine, then raise and support the vehicle, next remove the engine mount to bracket bolts, the engine mount to frame rail nuts, and the engine mount.
By Bob
GM Specialist
01/11/2022Q: How to balance the Lower Mount Powertrain Mount?
A:
You can loosen the front mount through bolt and the rear mount through bolt first, then shake the powertrain vigorously from front to rear and allow the powertrain to settle then tighten the rear motor mount through bolt and the front motor mount through bolt, finally lower the vehicle.
By Bob
GM Specialist
01/11/2022See more FAQs (15)