< Back ×
My Vehicle Change Vehicle
2007 Chevrolet Equinox
< Back to View All
Emission Control
- Department
- Brands
- Prices
OEM (Genuine) 2007 Chevrolet Equinox EGR Pipe
PartNumber: 12602507
Product Specifications- Other Names: EGR Pipe, Pipe
- Item Dimensions: 4.1 x 4.2 x 13.7 inches
- Item Weight: 1.20 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2007 Chevrolet Equinox EGR Pipe
Vehicle Fitment- 2007 Chevrolet Equinox | LS, LT, LTZ | 6 Cyl 3.4 L GAS
$87.27 MSRP:$164.68You Save: $77.41 (48%)
Dorman® OE Solutions Egr Tube for 2007 Chevrolet Equinox
PartNumber: 598-201Product Specifications- Notes: For Siemens EGR Valve; w/Horizontal Connector; Will only replace the EGR tube on 2005 & 2006 models that were retrofitted according to the Technical Service Bulletin from General Motors (will not replace the original tube on 2005 & 2006 models).
- End Type: Clamped
- Hose Line Length: 14'' (355.6 mm)
- Length: 14"
- Material: Stainless Steel
- OE Part Number: 12602507, 1231486
- Outside Diameter: 0.63'' (16 mm)
- Pieces: 1
- UPC: 019495250609
- Part Description: 2007 Chevrolet Equinox OE Solutions Egr Tube
Vehicle Fitment- 2007 Chevrolet Equinox | All Trims | 6 Cyl 3.4L
$33.59
FAQ for EGR Tube Repair
Q: How to remove the Exhaust Gas Recirculation?
A:
You will need to remove the injector sight shield, remove the bolt retaining the exhaust gas recirculation (EGR) pipe to the EGR valve, then remove the 2 bolts securing the EGR pipe to the exhaust manifold, the EGR pipe, and the EGR pipe to exhaust manifold gasket.
By Bob
GM Specialist
01/11/2022Q: How to install the Exhaust Gas Recirculation?
A:
You may need to install the EGR pipe to the exhaust manifold gasket, the EGR pipe, and the 2 bolts that secure the EGR pipe to the exhaust manifold, tighten the bolts to 10 N.m (89 lb in), install the bolt securing the EGR pipe bolt to the EGR valve, tighten the bolt to 30 Nm (22 lb-ft), and finally install the injector sight shield.
By Bob
GM Specialist
01/11/2022