< Back ×
My Vehicle Change Vehicle
2007 Chevrolet Equinox
< Back to View All
Driveline, Axles & 4WD
- Department
- Brands
- Prices
Dorman® OE Solutions Rear Driveshaft for 2007 Chevrolet Equinox
PartNumber: 946-035Product Specifications- Drive Shaft Diameter (In): 2.5 In.
- Drive Shaft Wall Thickness (In): 0.065 In.
- Greaseable Drive Shaft: Yes
- Length: 86"
- Material: Steel
- OE Part Number: 20811303, 25793000, 15801608, 19328628
- Outside Diameter: 2.5"
- Overall Length Adjustable: Yes
- Transmission Type: Automatic
- UPC: 885484619234
- Wall Thickness: 0.065"
- Part Description: 2007 Chevrolet Equinox OE Solutions Rear Driveshaft
Vehicle Fitment- 2007 Chevrolet Equinox | All Trims | 6 Cyl 3.4L
$516.97
Cardone Reman® Remanufactured Driveshaft/ Prop Shaft for 2007 Chevrolet Equinox
PartNumber: 65-1001AProduct Specifications- Notes: with 41-5/8" (1056 mm) Long Driveshaft;Front Section of 2 Pc Shaft; Measurement is taken from the CV face to the centerline of the furthest U-Joint on the opposite end of the collapsed Prop Shaft; Supplied as new
- Greasable: No
- Length: 41.625"
- Length (mm): 1056
- Material: Steel
- Measurement Method: Measurement is taken from the centerline of the weld on one end to the centerline of the weld on the opposite end of the collapsed Prop Shaft
- Product Condition: Remanufactured
- Part Description: 2007 Chevrolet Equinox Remanufactured Driveshaft/ Prop Shaft
Vehicle Fitment- 2007 Chevrolet Equinox | All Trims | All Engines
$284.26
Cardone Reman® Remanufactured Driveshaft/ Prop Shaft for 2007 Chevrolet Equinox
PartNumber: 65-1001BProduct Specifications- Notes: with 40-1/2" (1029 mm) Long Driveshaft;Rear Section of 2 Piece Driveshaft;Supplied as new; Measurement is taken from center of U-joint to the end of flange on the opposite side
- Greasable: No
- Length: 40.5"
- Length (mm): 1029
- Material: Steel
- Measurement Method: Measurement is taken from the centerline of the weld on one end to the centerline of the weld on the opposite end of the collapsed Prop Shaft
- Product Condition: Remanufactured
- Part Description: 2007 Chevrolet Equinox Remanufactured Driveshaft/ Prop Shaft
Vehicle Fitment- 2007 Chevrolet Equinox | All Trims | All Engines
$284.26
OEM (Genuine) 2007 Chevrolet Equinox Front & Rear Propeller Shaft Kit
PartNumber: 19259831
Product Specifications- Notes: Equinox, Torrent; 3.4l
- Other Names: Drive Shaft
- Item Dimensions: 103.6 x 6.9 x 8.9 inches
- Item Weight: 25.80 Pounds
- Fitment Type: Direct Replacement
- Replaces: 19152721
- Part Description: 2007 Chevrolet Equinox Front & Rear Propeller Shaft Kit
Vehicle Fitment- 2007 Chevrolet Equinox | LS, LT | 6 Cyl 3.4 L GAS
OEM (Genuine) 2007 Chevrolet Equinox Rear Axle Drive Shaft
PartNumber: 22727020
Product Specifications- Notes: All Wheel Drive; Equinox, Torrent; Left
- Location: Driver Side
- Other Names: Axle Assembly
- Item Dimensions: 43.9 x 5.5 x 5.6 inches
- Item Weight: 12.60 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2007 Chevrolet Equinox Rear Axle Drive Shaft
Vehicle Fitment- 2007 Chevrolet Equinox | LS, LT, LTZ, Sport | 6 Cyl 3.4 L GAS, 6 Cyl 3.6 L GAS
OEM (Genuine) 2007 Chevrolet Equinox Rear Axle Drive Shaft
PartNumber: 22727021
Product Specifications- Notes: All Wheel Drive; Equinox, Torrent; Right
- Location: Passenger Side
- Other Names: Axle Assembly
- Item Dimensions: 43.9 x 5.6 x 5.5 inches
- Item Weight: 14.30 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2007 Chevrolet Equinox Rear Axle Drive Shaft
Vehicle Fitment- 2007 Chevrolet Equinox | LS, LT, LTZ, Sport | 6 Cyl 3.4 L GAS, 6 Cyl 3.6 L GAS
OEM (Genuine) 2007 Chevrolet Equinox Front Wheel Drive Shaft Assembly
PartNumber: 15295798
Product Specifications- Notes: Equinox; 3.4l; Left
- Location: Driver Side
- Other Names: Axle, Axle Assembly
- Item Dimensions: 6.2 x 6.1 x 33.0 inches
- Item Weight: 15.10 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2007 Chevrolet Equinox Front Wheel Drive Shaft Assembly
Vehicle Fitment- 2007 Chevrolet Equinox | LS, LT, LTZ | 6 Cyl 3.4 L GAS
OEM (Genuine) 2007 Chevrolet Equinox Front Wheel Drive Shaft Assembly
PartNumber: 15295799Product Specifications- Notes: Equinox; 3.4l; Right
- Location: Passenger Side
- Other Names: Axle, Axle Assembly
- Item Dimensions: 7.2 x 6.2 x 28.6 inches
- Item Weight: 13.50 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2007 Chevrolet Equinox Front Wheel Drive Shaft Assembly
Vehicle Fitment- 2007 Chevrolet Equinox | LS, LT, LTZ | 6 Cyl 3.4 L GAS
FAQ for Driveshaft Repair
Q: What might be the reasons for the shudder on acceleration at low speed?
A:
Firstly, when accelerating the vehicle at low speed a shudder occurs. Secondly, bolts might be loose or missing at the flanges. Lastly, the universal joint might be worn.
By Bob
GM Specialist
29/10/2022Q: How to deal with the scraping noise?
A:
You can correct the interference if the pinion flange or center bearing is rubbing.
By Bob
GM Specialist
29/10/2022Q: What might be the reasons for the squeaking noise?
A:
Firstly, when driving the vehicle at various speeds a squeaking noise occurs. Secondly, there might be a lack of lubricant.
By Bob
GM Specialist
29/10/2022Q: What's the recommended torque for the support-bearing mounting bolts?
A:
The recommended torque is 25 N.m (19 lb-ft).
By Bob
GM Specialist
29/10/2022Q: What might be the reasons for the knocking or clunking noise?
A:
Firstly, a knocking or clunking noise occurs when operating the vehicle in high gear or coasting in neutral at 16 Km/h (10 mph). Secondly, there might be a worn or damaged universal joint. Thirdly, the side hub counterbore in the differential might be worn oversize.
By Bob
GM Specialist
29/10/2022Q: How to deal with the squeaking noise?
A:
You can replace the universal joints as required if there is a lack of lubricant.
By Bob
GM Specialist
29/10/2022Q: What might be the reasons for the scraping noise?
A:
Firstly, a scraping noise occurs when driving the vehicle at various speeds. Secondly, the pinion flange or center bearing might be rubbing.
By Bob
GM Specialist
29/10/2022Q: How to deal with the knocking or clunking noise?
A:
You can replace the worn or damaged universal joint if there is a worn or damaged universal joint. You can also replace the differential case and/or side gears if the side hub counterbore in the differential is worn oversize.
By Bob
GM Specialist
29/10/2022Q: How to deal with the shudder on acceleration at low speed?
A:
You can replace and/or tighten bolts to specified torque if bolts are loose or missing at the flanges, or replace the universal joint if the universal joint is worn.
By Bob
GM Specialist
29/10/2022Q: How to deal with the ping, snap, or click noise?
A:
You can tighten bolts to the specified torque. You can also replace the differential case and/or side gears if the side hub counterbore in the differential is worn oversize if there are loose bushing bolts in the upper and lower control arms, or tighten bolts and pinion nut to specified torque if there is a loose fixed yoke or companion flange, or replace the universal joints if there are worn or damage universal joints.
By Bob
GM Specialist
29/10/2022See more FAQs (8)